NMR / MRI Core Holder
Send a request
CT-CH-NMR
NMR / MRI Core Holder
Function. Hydrostatic core holder with a composite body and PEEK liner for NMR/MRI imaging, applying equal radial and axial confining pressure.
Controlled. Hydrostatic confining pressure; through-flow.
Measured. NMR/MRI response (with the imaging system) plus pressure and flow.
Materials. Non-magnetic composite body with PEEK liner.
Bore diameter, length, pressure and temperature ratings, sleeve and wetted materials, end connections and instrumentation are configured per project. Guaranteed performance and included hardware are stated only in the project-specific technical proposal and approved datasheet.
Model: LENMR
Tube and specimen configurations
- Type 1: the outer tube diameter is limited to 75 mm, and the working pressure rating is 5,000 psi. This version accepts cores with diameters of 1 and 1.5 inches.
- Type 2: the outer tube diameter is limited to 51 mm, and the working pressure rating is 3,000 psi. This version accepts a core diameter of 1 inch.
Shared construction and operating limits
- The upper operating temperature limit is 150°C.
- The tube has a maximum length of 480 mm.
- The accepted specimen length reaches 4 inches.
- PEEK and titanium form the components that contact fluid.
- Glass fiber forms the holder body.
- The internal liner uses PEEK.
- The specimen sleeve uses Teflon.
- The holder applies hydrostatic loading.
- The inlet consists of one port.
- The outlet consists of one port.
- Connection fittings have a size of 1/4 inch.









