Duplex SS 2205 Reactor
Send a request
Duplex SS 2205 Reactor
The LEDSS2205R is a reactor with wetted parts in duplex stainless steel 2205, for chloride-containing process fluids and ammonium carbamate solutions. Duplex steel combines corrosion resistance with higher strength than austenitic stainless steel at lower cost than high-nickel alloys. Plants use it for chloride solutions, ammonium carbamate, nitric acid and acidic ammonium nitrate service.
Material
Duplex 2205 is a two-phase ferritic-austenitic stainless steel with 22% chromium, 3% molybdenum and 5 to 6% nickel. Its yield strength is double that of standard austenitic grades. It has good fatigue strength and resists stress corrosion cracking, crevice and pitting corrosion, erosion and general corrosion. The ferrite phase also gives good performance in caustic environments, and the alloy keeps good oxidation resistance at high temperature.
Design
Volume runs from 1000 to 100000 liters, design pressure up to 200 bar and design temperature up to 300 °C. Heating is by steam, oil or electric heating. Stirring is by a magnetic drive or a mechanical seal. For high pressure, explosion clad steel plate is an option, with a steel base for strength and a duplex layer for corrosion resistance.
Internal fittings
- Internal heating or cooling coils, tube or spiral type
- Dip tube and temperature tube
- Shaft, couplings and combined paddle impeller
- Gas distributor and baffles
Vessel options
- Full jacket, half-pipe jacket or dimpled jacket
- Semi-elliptical, dished, hemispherical or flat head
Specify for your project
- Working volume, 1000 to 100000 L
- Design pressure and temperature, up to 200 bar and 300 °C
- Solid duplex 2205 or clad construction
- Chloride content and pH of the process fluid
- Heating method and stirrer drive
Each LEDSS2205R vessel is designed to the project base data.
This description defines the product family. Guaranteed performance, included hardware, exclusions, interfaces and acceptance criteria are stated only in the project-specific technical proposal and approved datasheet.
- Volume: 1000-100000liters
- Design pressure: maximum up to 200bar
- Design temperature: Up to 300℃
- Material:Duplex SS 2205
- Heating method: Steam; Oil; Electric
- Seal type: Magnetic stirrer drives or mechanical stirring
Construction of material(2205)
Duplex 2205 is a two-phase, ferritic, austenitic 22% chromium, 3% molybdenum, 5 to 6% nickel alloyed stainless steel. It is the most widely used duplex stainless steel grade and is characterized by high yield strength, double that of the standard austenitic stainless steel grades. It also demonstrates good fatigue strength, as well as outstanding resistance to stress corrosion cracking, crevice, pitting, erosion, and general corrosion in severe environments. Duplex 2205 is ideally suited for high-pressure and highly corrosive environments.
Corrosion Resistance
- Good oxidation resistance at high temperatures;
- High resistance to pitting and crevice corrosion, even in oxidizing and acidic solutions;
- Resistant to chloride stress corrosion cracking;
- The presence of ferrite provides for good performance of Duplex 2205 in caustic environments
Note: When the pressure is large, exposition clad steel plates could be considered, including base material for strength and clad material for anti-corrosion. Reduce costs for you!
Optional of Reactor
Internal fittings
- Internal heating/Cooling coils: Tube type or spiral coils;
- Dip tube & temperature measure tube;
- Shaft, Couplings & combined stirring paddle impeller;
- Gas distributor & baffles
Optional for pressure vessel
- Full jacket/Half-pipe jackets/Dimpled jackets
- Head type: Semi-elliptical/Dished/Hemispherical/Flact









