✓ In-house manufacturing — Hastelloy C276 & titanium✓ Custom engineering & prototypes✓ API / ASTM · CSA · CRN · CE✓ Serving US, Canada, EU, Middle East, Central Asia, Africa & LatAm

Carbon Steel High Pressure Reactor

  • For bulk production where the process medium is only mildly corrosive, the LECSHPR puts the pressure load on a carbon steel or low alloy steel shell. Volumes run from 1000 to 500000 liters. Carbon steel offers good tensile strength and ductility at low material cost, but it has limited corrosion resistance. It therefore suits high-pressure, low-corrosion duty, or it serves as the strength layer under a corrosion-resistant clad plate.

    Design

    Design pressure reaches 200 bar and design temperature reaches 350 °C. Heat is supplied by steam, thermal oil or electric heating through a full jacket, a half-pipe jacket or a dimpled jacket. The agitator shaft is sealed either by a magnetic stirrer drive or by a mechanical seal. Head types are semi-elliptical, dished, hemispherical or flat. When clad plate is used, the carbon steel base resists the internal pressure and the clad layer handles corrosion.

    Shell steels

    • Q345R: the most common low alloy pressure vessel steel, with high allowable stress, for low-corrosion, high-pressure service.
    • 15CrMoR: Cr and Mo additions improve resistance to hydrogen and performance at high temperature.
    • 16MnDR: low-temperature pressure vessel plate with a minimum operating temperature of -40 °C.

    Other wetted materials listed for this range: stainless steel, duplex stainless steel, Hastelloy B/C, nickel, titanium and zirconium.

    Options

    • Internal heating or cooling coils, tube type or spiral
    • Dip tube and temperature measuring tube
    • Shaft, couplings and combined stirring impellers
    • Gas distributor and baffles
    • Full, half-pipe or dimpled jacket

    Specify for your project

    • Volume, 1000 to 500000 liters
    • Design pressure up to 200 bar and design temperature up to 350 °C
    • Shell steel (Q345R, 15CrMoR or 16MnDR) and any clad layer
    • Heating method and jacket type
    • Seal type and internal fittings

    This description defines the product family. Guaranteed performance, included hardware, exclusions, interfaces and acceptance criteria are stated only in the project-specific technical proposal and approved datasheet.

    • Carbon Steel High Pressure Reactor
    • Volume: 1000-500000liters.
    • Design pressure: maximum up to 200bar
    • Design temperature: Up to 350℃
    • Material:CS, SS, Duplex SS, Hastelloy B/C, Nickel, Titanium, Zirconium, etc.
    • Heating method: Steam; Oil; Electric;
    • Seal type: Magnetic stirrer drives or mechanical stirring

    Construction of material

    Q345R: The most common low alloy steel, because of its economical and high stress strength, which is suitable for the low corrosion and high pressure application.

    15CrMoR: Due to the addition of Cr, Mo and other alloying elements into low carbon steel, the comprehensive properties of steel are greatly improved. It offer good performance to the hydrogen resistance and high temperature application.

    16MnDR:16MnDR is a kind of low temperature pressure vessel steel plate. Minimum operating temperature can reach to -40℃.

    Note: When steel cladding plates adoptted, carbon steel is considered as the high stress strength base plate for resisting the innner pressure!

    Optional

    Internal fittings

    • Internal heating/Cooling coils: Tube type or spiral coils;
    • Dip tube & temperature measure tube;
    • Shaft, Couplings & combined stirring paddle impeller;
    • Gas distributor & baffles

    Optional for pressure vessel

    • Full jacket/Half-pipe jackets/Dimpled jackets
    • Head type: Semi-elliptical/Dished/Hemispherical/Flact
Coretest