✓ In-house manufacturing — Hastelloy C276 & titanium✓ Custom engineering & prototypes✓ API / ASTM · CSA · CRN · CE✓ Serving US, Canada, EU, Middle East, Central Asia, Africa & LatAm

Alloy 904L Stainless Steel Cladding Reactor

  • The LEA904LSSCR is a custom industrial reactor in Alloy 904L stainless steel, solid or as internal cladding on a steel shell. Alloy 904L was developed for dilute sulfuric acid and also resists hot phosphoric acid, other inorganic acids and most organic acids. Plants use it for sulfuric, phosphoric, inorganic and organic acid production and for phosphate-based fertilizers.

    Material

    Alloy 904L is highly alloyed with chromium, molybdenum, nickel and copper, including 25% nickel and 4.5% molybdenum. This gives good resistance to uniform corrosion, pitting and chloride stress corrosion cracking. Where pressure is high, a steel base plate carries the load and a 904L clad layer resists corrosion.

    Design

    Volume runs from 1000 to 100000 liters, design pressure up to 200 bar and design temperature up to 300 °C. Heating is by steam, oil or electric heating. The stirrer is sealed by a magnetic drive or a mechanical seal.

    Internal fittings

    • Internal heating or cooling coils, tube or spiral type
    • Dip tube and temperature tube
    • Shaft, couplings and combined paddle impeller
    • Gas distributor and baffles

    Vessel options

    • Full jacket, half-pipe jacket or dimpled jacket
    • Semi-elliptical, dished, hemispherical or flat head

    Specify for your project

    • Working volume, 1000 to 100000 L
    • Working pressure and temperature, up to 200 bar and 300 °C
    • Solid 904L or 904L clad construction
    • Heating method: steam, oil or electric
    • Seal type: magnetic or mechanical
    • Acid type, concentration and temperature

    Each LEA904LSSCR vessel is designed to the base data supplied with the enquiry.

    This description defines the product family. Guaranteed performance, included hardware, exclusions, interfaces and acceptance criteria are stated only in the project-specific technical proposal and approved datasheet.

    • Alloy 904L Stainless Steel Cladding Reactor
    • Alloy 904L Stainless Steel Cladding Reactor
    • Volume: 1000-100000liters
    • Design pressure: maximum up to 200bar
    • Design temperature: Up to 300℃
    • Material:Alloy 904L

    Customize for your reactor

    Base data

    • Working volume/ Material;
    • Working pressure/ temperature;
    • Heating method: Steam/ Oil/ Electric;
    • Seal type: Magnetic or mechanical

    Internal fittings

    • Internal heating/Cooling coils: Tube type or spiral coils;
    • Dip tube & temperature measure tube;
    • Shaft, Couplings & combined stirring paddle impeller;
    • Gas distributor & baffles

    Optional for pressure vessel

    • Full Jacket/ Half-pipe jackets/ Dimpled jackets;
    • Head type:Semi-elliptical/ Dished/ Hemispherical/ Flat;
    • Internal Cladding steel for anti-corrosion application.

    Construction of material(Alloy 904L)

    With its highly alloyed chemistry — 25% nickel and 4.5% molybdenum, 904L provides good chloride stress corrosion cracking resistance, pitting and general corrosion resistance.

    Alloy 904L was originally developed to withstand environments containing dilute sulfuric acid. It also offers good resistance to other inorganic acids such as hot phosphoric acid as well as most organic acids.

    Note: When the pressure is large, Steel cladding plates could be considered, including base material for strength and clad material for anti-corrosion.

    Corrosion Resistant

    • Good resistance to uniform corrosion.
    • Provides excellent resistance to dilute sulfuric acid, phosphoric acid and most organic acids.
    • Resistance to chloride stress corrosion cracking (SSC) increases.
Coretest