Multi-Place Cold Finger
Send a request
CT-FA-CF
Multi-Place Cold Finger
Function. Quantifies wax-inhibitor efficiency by storing a hydrocarbon sample in multiple cells, each with a different inhibitor dose, against a cooled surface.
Controlled. Cell and cold-finger temperature; inhibitor dose per cell.
Measured. Deposited wax mass per cell; inhibitor ranking.
Pressure and temperature ratings, wetted materials, cell/loop geometry and instrumentation are configured per project. Guaranteed performance and included hardware are stated only in the project-specific technical proposal and approved datasheet.
Models: LEMCF, LEMCF6, LEMCF12, LEMCF18
Technical data
- An arrangement for 6 sample bottles is available.
- A further arrangement accommodates 12 sample bottles.
- The larger arrangement accommodates 18 sample bottles.
- Tests operate at atmospheric pressure.
- Oil temperature can range from ambient conditions to 100°C.
- The cold finger operates between -10°C and 80°C.
- The oil and a cold finger may differ in temperature by up to 20°C.
- Any two cold fingers may have a temperature difference up to 20°C.
- The stirrer runs between 100 and 2,000 rpm.
- Each test requires 100 ml of sample.
- Each cold finger uses 1 temperature sensor for its control.
- Electrical supply options are 220 VAC at 50 Hz or 220 VAC at 60 Hz.
Operation and applications
- Tests run under automatic control.
- Measurements can proceed in parallel.
- Temperature ramps and adjustable stirring speeds are available.
- Each cold finger has its own temperature control.













