Stirred Vacuum Distillation Reactor
Send a request
Stirred Vacuum Distillation Reactor
The LESVAR stirred vacuum distillation reactor is a complete distillation set: the stirred vessel is supplied with a reflux condenser, an external condenser, a collect tank, a constant pressure feeding system, a vacuum pump with buffer tank, pipeline and controller. Capacities run from 5L to 50L. It is used for synthesis, polymerization, crystallization, biomass and petrochemical research where solvent or product must be distilled off under vacuum.
Design
A magnetic coupling drive turns the stirrer without a packed gland. The flat cover is lifted and lowered by hand. The head is a flat cover or elliptical flange head. Electric heating is standard; thermal oil, steam or far infrared heating are available. Internal spiral cooling coils are optional. The product discharges from the bottom or is pushed up by pressure. A PID controller sets temperature, and the panel shows stirring speed, operation time, heating voltage and current.
- Material: stainless steel 304/316 or other alloys
- Impeller: propeller, paddle, anchor, spiral, turbine or gas inducing type
- Standard fittings: pressure gauge, thermocouple, internal stirring system, liquid and gas inlets with needle valves, dip tube, safety rupture disc, cooling coil
- Optional: solid plug port, safety valve, drain valve, receiver
Model Nominal capacity Stirring speed Heating power LESVAR-5 5L 0-750 rpm 4 kW LESVAR-10 10L 0-750 rpm 9 kW LESVAR-20 20L 0-500 rpm 9-12 kW LESVAR-30 30L 0-500 rpm 12 kW LESVAR-40 40L 0-500 rpm 12 kW LESVAR-50 50L 0-500 rpm 15 kW Typical applications
- Hydrogenation, polymerization and synthesis
- Catalyst testing and evaluation
- Crystallization and chemical development
- Petrochemical and biomass research, zeolite synthesis
- Scale-up, pilot plant and small-scale production
Specify for your project
- Nominal capacity, 5L to 50L
- Vacuum level and design pressure
- Process temperature and heating method
- Condenser and receiver sizes
- Material
This description defines the product family. Guaranteed performance, included hardware, exclusions, interfaces and acceptance criteria are stated only in the project-specific technical proposal and approved datasheet.
Features
- Flat cover lid: Manual lifting & lowering
- Shaft seal: Magnetic coupling drive
- Accessories: Reflux condenser, external condenser, collect tank, constant pressure feeding system, vacuum pump & buffer tank, pipeline and controller etc.
- Reactor volume: 5-50 liters
- Design pressure: standard 100 bar; up to 250 bar
- Design temperature: standard 350 °C; up to 500 °C
- Material: Stainless steel 304/316
Specifications
Model No. LESVAR-5 LESVAR-10 LESVAR-20 LESVAR-30 LESVAR-40 LESVAR-50 Nominal Capacity 5L 10L 20L 30L 40L 50L Design Pressure Standard 100 bar Maximum pressure up to 250 bar Material SS304, SS316 or other alloys Design Temperature Standard 350 °C ; Up to 500 °C Stirring Speed 0-750 rpm 0-750 rpm 0-500 rpm 0-500 rpm 0-500 rpm 0-500 rpm Motor Power 0.6 kW 1.1 kW 1.5 kW 1.5 kW 1.5 kW 1.5 kW Heating Power 4 kW 9 kW 9-12 kW 12 kW 12 kW 15 kW Heating Method Standard electric heating (Thermal oil. steam, far infrared heating available) Head type Flat cover type or elliptical flange head Impeller type (Optional) Propeller, paddle, anchor, spiral, turbine, gas inducing type, etc Cooling type (Optional) Internal spiral cooling cools Discharging type Discharging from bottom or up discharge by pressure. Control panel PID temperature display and control, accuracyil °C; Stirring speed display; Operation time display; Heating voltage and current display. Standard Pressure Gage; Thermocouple; Internal Stirring System Liquid inlet and gas inlet with needle valve Dip Tube; Safety Rupture Disc; Cooling Coil Optional Solid plug port, constant feeding tank, safety valve, external condenser, Reflux pipeline, drain valve, receiver, etc.









