Pilot Pressure Reactor Plant
Send a request
Pilot Pressure Reactor Plant
The LEPPRP Pilot Pressure Reactor Plant is a stirred autoclave on a fixed frame, combined with an external receiver and a collection tank. Product leaves the vessel through a bottom drain valve and is collected downstream under control, so the unit runs a reaction and product collection in one setup. Process development laboratories use it for catalytic and polymerization work that needs repeatable batches between bench and pilot scale.
Design
The reactor vessel is fixed. The flat cover lid has lifting and lowering functions and closes on a flange with bolts. The stirrer is driven through a magnetic coupling, so there is no packed gland on the shaft. All sizes are rated 10 MPa working pressure and 350 °C working temperature, with a stirring speed of 0 to 1500 r/min. Wetted parts are SS304 or SS316.
Heating is general electric heating, from 1 kW on the smallest vessel to 4 kW on the 5 L vessel. Cooling is by internal spiral coils. The vessel is charged from above. The control panel displays temperature, time and heating voltage, controls temperature by PID to ±1 ℃, and displays and sets the stirring speed. The external receiver has its own control element.
Typical applications
- Hydrogenation, catalyst screening and testing
- Polymerization, styrene butadiene
- Alkoxylation and ethoxylation
- Hydrocracking, dehydrogenation, oxidation
- Fischer-Tropsch synthesis and carboxylation
- Fluid catalytic cracking studies, biojet fuel production, distillation
What is included
- Pressure gauge, thermocouple and internal stirring system
- Liquid inlet and gas inlet with needle valves, gas release valve
- Dip tube, safety rupture disc, cooling coil
- External receiver with control element, bottom drain valve
Specify for your project
- Nominal capacity: 0.5, 1, 2, 3 or 5 L
- Wetted material: SS304 or SS316
- Stirrer: propeller, paddle, anchor or custom
- Receiver and collection tank size for your product volume
- Process gases and liquids to be fed through the inlets
Model Capacity (L) Motor (kW) Heating (kW) LEPPRP-0.5 0.5 0.15 1 LEPPRP-1 1 0.2 2 LEPPRP-2 2 0.2 2 LEPPRP-3 3 0.2 3 LEPPRP-5 5 0.6 4 This description defines the product family. Guaranteed performance, included hardware, exclusions, interfaces and acceptance criteria are stated only in the project-specific technical proposal and approved datasheet.
Features
- Flat cover lid: Lifting & lowering functions
- Closure type: Flange type with bolts closure
- Shaft seal: Magnetic coupling drive
- Reactor vessel: Fixed
- Euipped with external receiver with control element
- Euipped with bottom drain valve
- Control: PID temperature control.
Specifications
Model No. LEPPRP-0.5 LEPPRP-1 LEPPRP-2 LEPPRP-3 LEPPRP-5 Nominal Capacity (L) 0.5 1 2 3 5 Working Pressure (MPa) 10 10 10 10 10 Working Temperature (℃) 350 350 350 350 350 Stirring Speed (r/min) 0-1500 0-1500 0-1500 0-1500 0-1500 Motor power (kW) 0.15 0.2 0.2 0.2 0.6 Heating Power (kW) 1 2 2 3 4 Material SS304 or SS316 Heating Method General electric heating Cooling Method Internal spiral coils Charging Method Charging from above Stirring type Propeller, paddle type, anchor type or customized Control panel Temperature, time and heating voltage display
Temperature adjustment control, accuracy±1 ℃
Stirring speed display and controlStandard fittings Pressure Gage; Thermocouple; Internal Stirring System
Liquid inlet and gas inlet with needle valve;Gas Release Valve
Dip Tube; Safety Rupture Disc; Cooling Coil









