Moveable Electric Lifting Laboratory Stirred Reactors
Send a request
Moveable Electric Lifting Laboratory Stirred Reactors
LEMELLSR reactors are laboratory autoclaves from 500 ml to 5 liters in which an electric lift raises the head assembly off the vessel. The reactor sits on a floor stand or a moveable cart. Powered lifting removes the manual handling of a heavy head, and a manual tilting device turns the vessel for charging and cleaning. Laboratories use this layout when the reactor is too heavy to open by hand or when the setup has high automation requirements.
How it works
The vessel is charged from above, closed and heated by general electric heating; water recirculation and thermal oil heating are available. Cooling is through spiral coils, single or serpentine. The stirrer is turned through a magnetic coupling with a static seal, offered from low to high torque. Stirring speed is 0 to 1500 r/min with propeller, paddle, anchor or custom stirrers.
Standard models are rated 10 MPa working pressure and 350 ℃ working temperature. The family reaches 300 bar maximum pressure and 500 ℃ maximum temperature on request. The control panel displays temperature, time and heating voltage, controls temperature to ±1 ℃, and displays and sets stirring speed. Temperature, pressure, motor speed, gas and liquid flow and level can be monitored and controlled. A rupture disc is fitted on the safety port.
What is included
- Vessel and head with magnetic coupling drive and motor
- Electric heater and spiral cooling coil
- Electric lift with manual tilt, on floor stand or moveable cart
- Control panel for temperature, time, heating voltage and speed
- Rupture disc on the safety port
Specify for your project
- Nominal capacity: 0.5, 1, 2, 3 or 5 L
- Pressure and temperature: standard 10 MPa and 350 ℃, or up to 300 bar and 500 ℃
- Material: SS304, SS316, titanium, nickel, Hastelloy B/C, Monel, zirconium, Inconel, tantalum
- Floor stand or moveable cart
- Extra measured variables: pressure, flow, level
Model Capacity (L) Motor (kW) Heating (kW) LEMELLSR-0.5 0.5 0.15 1 LEMELLSR-1 1 0.2 2 LEMELLSR-2 2 0.2 2 LEMELLSR-3 3 0.2 3 LEMELLSR-5 5 0.6 4 This description defines the product family. Guaranteed performance, included hardware, exclusions, interfaces and acceptance criteria are stated only in the project-specific technical proposal and approved datasheet.
Features
- Electric lifting pressure reactors / Floor stands or moveable cart type.
- Laboratory autoclaves with 500 ml to 5 liters volume.
- Max pressure: 300 bar; Max temperature up to 500 ℃
- Low to high torque magnetic couplings: static seal with no leakage.
- Available material:SS304, SS316, Titanium, Nickel, Hastelloy B/C, Monel, Zirconium, Inconel, Tantalum.
- Powered lifting and manual tilting device for easy operation,low labor cost.
- Smooth run, low noise and easy operation.
- Monitor and control: Temperature, pressure, motor speed, gas / liquid flow, level, etc
- Safety Device (Blasting Disc) on Security Blasting Port.
- Customized according to customers requirement.
Specifications
Model No. LEMELLSR-0.5 LEMELLSR-1 LEMELLSR-2 LEMELLSR-3 LEMELLSR-5 Nominal Capacity (L) 0.5 1 2 3 5 Working Pressure (MPa) 10 10 10 10 10 Working Temperature(℃) 350 350 350 350 350 Stirring Speed (r/min) 0-1500 0-1500 0-1500 0-1500 0-1500 Motor power (kW) 0.15 0.2 0.2 0.2 0.6 Heating Power (kW) 1 2 2 3 4 Heating Method General electric heating(water recycling, thermal oil heating available) Cooling Method Spiral coils(Single coils, serpentine coils available) Charging Method Charging from above Lifting type Electric Stirring type Propeller, paddle type, anchor type or customized Control panel Temperature, time and heating voltage display Temperature adjustment control, accuracy±1 ℃ Stirring speed display and control Product details
Structure drawings

Control system

Interal components




















