Laboratory Stainless Steel Pressure Reactor with Lift & Tilt
Send a request
Laboratory Stainless Steel Pressure Reactor with Lift & Tilt
The LELSPRLT is a laboratory stainless steel pressure reactor whose head lifts and whose vessel tilts. The top cover and agitator are raised and lowered by hand, and the vessel body rotates manually to pour out the product. Six sizes cover 100 ml to 5 liters. Laboratories use it for hydrogenation, polymerization, synthesis, catalyst testing and corrosion tests.
Design
The vessel closes with a bolted flange. A belt drive connects the motor to a high torque magnetic coupling that turns the internal stirrer, so there is no packed gland to leak. Standard working pressure is 100bar, with versions up to 350bar. Standard working temperature is 350 °C. Electric heating is standard; thermal oil recycling or far infrared heating are optional. Internal spiral coils with a water tap cool the vessel. Stirring speed is 0-1500 rpm.
- Discharge: up discharge by pressure or bottom valve
- Stirrer: propeller, paddle, anchor or customized
- Control panel: PID temperature control, accuracy ± 1 °C, stirring speed display and control
- Fittings: pressure gauge, thermocouple, internal stirring system, liquid and gas inlets with needle valves, dip tube, safety rupture disc, cooling coil
- Material: SS-304, SS-316 or other alloys
Model Nominal capacity Motor power Heating power LELSPRLT-0.1 100 ml 150 W 1 kW LELSPRLT-0.25 250 ml 150 W 1 kW LELSPRLT-0.5 500 ml 150 W 1 kW LELSPRLT-1 1 liters 0.2 kW 2 kW LELSPRLT-2 2 liters 0.2 kW 2 kW LELSPRLT-5 5 liters 0.6 kW 4 kW Typical applications
- Hydrogenation, polymerization and synthesis
- Catalyst testing and evaluation
- Crystallization and chemical development
- Petrochemical and biomass research, zeolite synthesis
- Corrosion testing, scale-up and small-scale production
Specify for your project
- Volume, 100 ml to 5 liters
- Working pressure: standard 100bar or higher up to 350bar
- Working temperature
- Material: SS-304, SS-316 or other alloy
- Heating method and discharge type
This description defines the product family. Guaranteed performance, included hardware, exclusions, interfaces and acceptance criteria are stated only in the project-specific technical proposal and approved datasheet.
Salient Features
- Lab stirred pressure autoclave reactor
- Flange closure with bolts
- Vessel body can be manual rotate for discharge;
- Top cover & agitator can be manual lifting & lowering
- Pressure gauge display and temperature sensor
- Internal cooling coils with water tap;
- Control panel with program PID temperature controller.
- Gas/liquid inlet & outlet with needle valve control, dip tube, etc;
Magnetic stirrer
- All stirred reactors are equipped with a magnetic drive to provide a trouble-free linkage to an internal stirrer, thereby avoiding the leakage problems which sometimes arise with a packed gland stirrer drive.
- Belt drive between motor and magnetic drive;
- High torque magnetic couplings;
- Static magnetic coupling seal. Low energy cost.
Specifications
- 100ml to 5 liters volume;
- Standard 100bar, maximum up to 350bar;
- Temperature: standard 350 °C; up to 500 °C;
- Standard materials:SS-304, SS-316, other alloys, etc.
Model No. LELSPRLT-0.1 LELSPRLT-0.25 LELSPRLT-0.5 LELSPRLT-1 LELSPRLT-2 LELSPRLT-5 Nominal Capacity 100 ml 250 ml 500 ml 1 liter 2 liters 5 liters Max Working Pressure Standard 100bar; Max pressure up to 350bar Working Temperature Standard 350 °C; Up to 500 °C Stirring Speed 0-1500 rpm Motor Power 150 W 150 W 150 W 0.2 kW 0.2 kW 0.6 kW Heating Power 1 kW 1 kW 1 kW 2 kW 2 kW 4 kW Material SS304. SS316 or other alloys Heating Method Standard Electric heating (Thermal oil recycling, far infrared heating optional) Cooling Method Internal spiral coils Charging Method Up discharge by pressure or discharge by bottom valve Stirring type Propeller, paddle type, anchor type or customized Control panel Temp, display and control, accuracy ± 1 :C; Stirring speed display & control. Pressure Gage; Thermocouple; Internal Stirring System Standard fittings Liquid inlet and gas inlet with needle valve Dip Tube; Safety Rupture Disc; Cooling Coil Note
- Customer is advised to select best suited options for most optimized price & delivery.
- Customization of volume, material, pressure, temperature etc. may be possible on request.
- Different power supply options may be possible on request.









