Lab Stirred Stainless Steel Resin Reactor
Send a request
Lab Stirred Stainless Steel Resin Reactor
Resin synthesis often needs vapor condensed and returned to the batch. The LELSSRR stirred stainless steel resin reactor has an external condenser on the vapor outlet and a reflux tube line back to the reactor cover, so the mixture keeps reacting until conversion is complete. Sizes run from 0.5 L to 5 L, on a floor stand or a moveable cart.
How it works
Vapor leaves through the vapor outlet port, condenses in the external condenser and flows back through the reflux port in the cover, with a control valve on the reflux line. The stirrer is driven through a magnetic coupling, a static seal with no rotating shaft seal to the atmosphere. Working pressure is 10 MPa and working temperature 350 ℃ for the standard models. Stirring speed is 0-1500 r/min.
- Heating: general electric heating; water recycling or thermal oil heating available
- Cooling: spiral coil; single or serpentine coils available
- Charging from above
- Stirrer: propeller, paddle, anchor or customized
- Control panel: temperature, time and heating voltage display, temperature control accuracy ±1 ℃, stirring speed display and control
- Monitoring of temperature, pressure, motor speed and level
What is included
Pressure gauge, thermocouple, internal stirring system, liquid and gas inlets with needle valves, dip tube, safety rupture disc, cooling coil, vapor outlet port, external condenser, reflux tube line and control valve.
Model Nominal capacity (L) Motor power (kW) Heating power (kW) LELSSRR-0.5 0.5 0.15 1 LELSSRR-1 1 0.2 2 LELSSRR-2 2 0.2 2 LELSSRR-3 3 0.2 3 LELSSRR-5 5 0.6 4 Specify for your project
- Nominal capacity, 0.5 to 5 L
- Working pressure and temperature
- Material: SS304, SS316, Titanium, Nickel, Hastelloy B/C, Monel, Zirconium, Inconel or Tantalum
- Heating and cooling method
- Floor stand or moveable cart
This description defines the product family. Guaranteed performance, included hardware, exclusions, interfaces and acceptance criteria are stated only in the project-specific technical proposal and approved datasheet.
Product features
- Floor stands or moveable cart type.
- Laboratory autoclaves with 500 ml to 5 liters volume.
- Working pressure: 10 MPa; Working temperature: 350 ℃
- Low to high torque magnetic couplings: static seal with no leakage.
- Equipped with external condenser, reflux tube line.
- Available material:SS304, SS316, Titanium, Nickel, Hastelloy B/C, Monel, Zirconium, Inconel, Tantalum
- Smooth run, low noise and easy operation.
- Monitor and control: Temperature, pressure, motor speed, level, etc
- Safety Device (Blasting Disc) on Security Blasting Port.
- Customized according to customers requirement.
Standard specifications
Model No. LELSSRR-0.5 LELSSRR-1 LELSSRR-2 LELSSRR-3 LELSSRR-5 Nominal Capacity (L) 0.5 1 2 3 5 Working Pressure (MPa) 10 10 10 10 10 Working Temperature(℃) 350 350 350 350 350 Stirring Speed (r/min) 0-1500 0-1500 0-1500 0-1500 0-1500 Motor power (kW) 0.15 0.2 0.2 0.2 0.6 Heating Power (kW) 1 2 2 3 4 Heating Method General electric heating(water recycling, thermal oil heating available) General electric heating(water recycling, thermal oil heating available) General electric heating(water recycling, thermal oil heating available) General electric heating(water recycling, thermal oil heating available) General electric heating(water recycling, thermal oil heating available) Cooling Method Spiral coils(Single coils, serpentine coils available) Spiral coils(Single coils, serpentine coils available) Spiral coils(Single coils, serpentine coils available) Spiral coils(Single coils, serpentine coils available) Spiral coils(Single coils, serpentine coils available) Charging Method Charging from above Charging from above Charging from above Charging from above Charging from above Stirring type Propeller, paddle type, anchor type or customized Propeller, paddle type, anchor type or customized Propeller, paddle type, anchor type or customized Propeller, paddle type, anchor type or customized Propeller, paddle type, anchor type or customized Control panel Temperature, time and heating voltage display; Temperature adjustment control, accuracy±1 ℃; Stirring speed display and control Temperature, time and heating voltage display; Temperature adjustment control, accuracy±1 ℃; Stirring speed display and control Temperature, time and heating voltage display; Temperature adjustment control, accuracy±1 ℃; Stirring speed display and control Temperature, time and heating voltage display; Temperature adjustment control, accuracy±1 ℃; Stirring speed display and control Temperature, time and heating voltage display; Temperature adjustment control, accuracy±1 ℃; Stirring speed display and control Standard fittings Pressure Gage; Thermocouple; Internal Stirring System; Liquid inlet and gas inlet with needle valve;Vapor outlet port; Dip Tube; Safety Rupture Disc; Cooling Coil; External Conenser; Reflux tube line and control valve Pressure Gage; Thermocouple; Internal Stirring System; Liquid inlet and gas inlet with needle valve;Vapor outlet port; Dip Tube; Safety Rupture Disc; Cooling Coil; External Conenser; Reflux tube line and control valve Pressure Gage; Thermocouple; Internal Stirring System; Liquid inlet and gas inlet with needle valve;Vapor outlet port; Dip Tube; Safety Rupture Disc; Cooling Coil; External Conenser; Reflux tube line and control valve Pressure Gage; Thermocouple; Internal Stirring System; Liquid inlet and gas inlet with needle valve;Vapor outlet port; Dip Tube; Safety Rupture Disc; Cooling Coil; External Conenser; Reflux tube line and control valve Pressure Gage; Thermocouple; Internal Stirring System; Liquid inlet and gas inlet with needle valve;Vapor outlet port; Dip Tube; Safety Rupture Disc; Cooling Coil; External Conenser; Reflux tube line and control valve Product details


Control system

Internal Components




















