Lab Pressure Autoclave Reactor with External Condenser
Send a request
Lab Pressure Autoclave Reactor with External Condenser
The LELPAREC lab pressure autoclave is fitted with an external condenser and a receiving tank, so vapor from the reaction can be condensed and collected outside the vessel. Laboratories use it for reactions with distillation steps, such as hydrogenation, polymerization, alkoxylation and oxidation, at up to 5 L nominal capacity.
Design
The reactor vessel and flat cover are fixed, and the closure is a bolted flange. A magnetic coupling drive turns the stirrer without a packed shaft seal. Electric heating with PID temperature control takes the vessel from 20 °C to +350 °C, and internal spiral coils cool it. Working pressure is -1 (full vacuum) to +100 bar, 10 MPa. Material is stainless steel 304/316. Stirring speed is 0-1500 r/min.
- Charging from above
- Stirrer: propeller, paddle, anchor or customized
- Control panel: temperature, time and heating voltage display, temperature control accuracy ±1 ℃, stirring speed display and control
- Standard fittings: pressure gauge, thermocouple, internal stirring system, liquid and gas inlets with needle valves, gas release valve, dip tube, safety rupture disc, cooling coil
Model Nominal capacity (L) Motor power (kW) Heating power (kW) LELPAREC-0.5 0.5 0.15 1 LELPAREC-1 1 0.2 2 LELPAREC-2 2 0.2 2 LELPAREC-3 3 0.2 3 LELPAREC-5 5 0.6 4 Typical applications
- Hydrogenation, catalyst screening and testing
- Polymerization, styrene butadiene
- Alkoxylation, ethoxylation, distillation
- Hydrocracking, dehydrogenation, oxidation
- Fluid catalytic cracking, biojet fuel production
Specify for your project
- Nominal capacity, up to 5 L
- Pressure: -1 to +100 bar
- Temperature: 20 °C to +350 °C
- Material: SS304 or SS316
- Condenser and receiving tank size
This description defines the product family. Guaranteed performance, included hardware, exclusions, interfaces and acceptance criteria are stated only in the project-specific technical proposal and approved datasheet.
Features
- Flat cover lid: Fixed
- Closure type: Flange type with bolts closure
- Shaft seal: Magnetic coupling drive Reactor vessel: Fixed
- Heating method: Electric heating
- Control: PID temperature control.
- Reactor volume: 0.5-5.0 liters
- Pressure: -1 (FV) to +100 bar Temperature: 20 °C to +350 °C
- Material: Stainless steel 304/316
- Euipped with external condenser, receiving tank.
Specifications
Model No. LELPAREC-0.5 LELPAREC-1 LELPAREC-2 LELPAREC-3 LELPAREC-5 Nominal Capacity (L) 0.5 1 2 3 5 Working Pressure (MPa) 10 10 10 10 10 Working Temperature (℃) 350 350 350 350 350 Stirring Speed (r/min) 0-1500 0-1500 0-1500 0-1500 0-1500 Motor power (kW) 0.15 0.2 0.2 0.2 0.6 Heating Power (kW) 1 2 2 3 4 Material SS304 or SS316 Heating Method General electric heating Cooling Method Internal spiral coils Charging Method Charging from above Stirring type Propeller, paddle type, anchor type or customized Control panel Temperature, time and heating voltage display
Temperature adjustment control, accuracy±1 ℃
Stirring speed display and controlStandard fittings Pressure Gage; Thermocouple; Internal Stirring System
Liquid inlet and gas inlet with needle valve;Gas Release Valve
Dip Tube; Safety Rupture Disc; Cooling Coil









