Floor Stand Stirred Pressure Reactor with Drain Valve and Reflux
Send a request
Floor Stand Stirred Pressure Reactor with Drain Valve and Reflux
The LEFSPRDVR is a floor-standing stirred pressure reactor with a drain valve and a reflux condenser. It combines bottom discharge, vapor reflux and back pressure control on one frame, for reactions where the batch is refluxed under pressure and then drained. Typical uses include hydrogenation, alkoxylation, oxidation and catalyst testing.
Design
The reactor vessel and flat cover are fixed and close with a bolted flange. A magnetic coupling drive turns the stirrer at 0-1500 r/min, with no packed gland. Working pressure is -1 (full vacuum) to +100 bar, 10 MPa. Material is stainless steel 304/316. Internal spiral coils cool the batch, and the PID controller holds temperature with ±1 ℃ accuracy.
What is included
- Reflux condenser
- Drain valve and high temperature valve
- Back pressure valve
- Rupture disc device and pressure sensor
- Pressure gauge, thermocouple, liquid and gas inlets with needle valves, gas release valve, dip tube, cooling coil
Model Nominal capacity (L) Motor power (kW) Heating power (kW) LEFSPRDVR-0.5 0.5 0.15 1 LEFSPRDVR-1 1 0.2 2 LEFSPRDVR-2 2 0.2 2 LEFSPRDVR-3 3 0.2 3 LEFSPRDVR-5 5 0.6 4 Typical applications
- Hydrogenation, catalyst screening and testing
- Polymerization, styrene butadiene
- Alkoxylation, ethoxylation, distillation
- Hydrocracking, dehydrogenation, oxidation
- Fluid catalytic cracking, biojet fuel production
Specify for your project
- Nominal capacity, 0.5 to 5 L
- Pressure up to +100 bar
- Process temperature and heating method
- Material: SS304 or SS316
- Stirrer: propeller, paddle, anchor or customized
This description defines the product family. Guaranteed performance, included hardware, exclusions, interfaces and acceptance criteria are stated only in the project-specific technical proposal and approved datasheet.
Features
- Flat cover lid: Fixed
- Closure type: Flange type with bolts closure
- Shaft seal: Magnetic coupling drive Reactor vessel: Fixed
- Heating method: General electric heating
- Control: PID temperature control.
- Reactor volume: 0.5-5.0 liters
- Pressure: -1 (FV) to +100 bar Working temperature: 350 °C
- Material: Stainless steel 304/316
- Euipped with flux condenser, rupture buristing disc device, drain valve, back pressure valve, high temperature valve, pressure sensor
Specifications
Model No. LEFSPRDVR-0.5 LEFSPRDVR-1 LEFSPRDVR-2 LEFSPRDVR-3 LEFSPRDVR-5 Nominal Capacity (L) 0.5 1 2 3 5 Working Pressure (MPa) 10 10 10 10 10 Working Temperature (℃) 350 350 350 350 350 Stirring Speed (r/min) 0-1500 0-1500 0-1500 0-1500 0-1500 Motor power (kW) 0.15 0.2 0.2 0.2 0.6 Heating Power (kW) 1 2 2 3 4 Material SS304 or SS316 Heating Method General electric heating Cooling Method Internal spiral coils Charging Method Charging from above Stirring type Propeller, paddle type, anchor type or customized Control panel Temperature, time and heating voltage display
Temperature adjustment control, accuracy±1 ℃
Stirring speed display and controlStandard fittings Pressure Gage; Thermocouple; Internal Stirring System
Liquid inlet and gas inlet with needle valve;Gas Release Valve
Dip Tube; Safety Rupture Disc; Cooling Coil









