✓ In-house manufacturing — Hastelloy C276 & titanium✓ Custom engineering & prototypes✓ API / ASTM · CSA · CRN · CE✓ Serving US, Canada, EU, Middle East, Central Asia, Africa & LatAm

Explosion Proof Pressure Reactor

  • The LEEPPR series is a family of 50 to 500 liter stirred pressure autoclaves for scale-up, pilot plant runs and small-scale production. The control panel has a programmable PID temperature controller and is offered in an explosion-protected version for areas where flammable solvents or hydrogen are handled; the hazardous area classification and marking of the panel and motor are defined on request. A manual lifting device opens the heavy cover lid without a crane.

    Design

    Design pressure is set to the project, up to 250 bar for the 50 to 200 L vessels, with ratings for the 300 and 500 L vessels confirmed on request. Design temperature is 0 to 350 °C, set to the project. The stirrer runs through a high torque magnetic coupling drive, so the shaft has no packed gland. Stirring speed is 0 to 500 rpm on the 50 and 100 L vessels and 0 to 450 rpm on the 200 to 500 L vessels, with motors of 1.5 to 5.5 kW. Impellers are propeller, paddle, anchor, spiral, turbine or gas inducing type.

    The vessel is clad SS304, SS316 or another alloy; Hastelloy B/C, nickel, titanium and zirconium are listed. The head is a flat cover or an elliptical flange type. Heating is electric as standard, or by jacket with thermal oil, steam or far infrared heating. Internal cooling coils with a water tap remove reaction heat. Product is discharged from the bottom or pushed up by pressure. The panel displays and controls temperature to ±1 °С, and shows stirring speed, operation time, heating voltage and current.

    Typical applications

    • Hydrogenation, polymerization and synthesis
    • Catalyst testing and evaluation, catalytic reactions
    • Crystallization, chemical development, zeolite synthesis
    • Corrosion testing, petrochemical and biomass research
    • Scale-up, pilot plant, small-scale production

    What is included

    • Pressure gauge, thermocouple, internal stirring system
    • Gas and liquid inlet and outlet with needle valves, dip tube
    • Safety rupture disc, internal cooling coil
    • Control panel (explosion-protected version on request)

    Options

    Bottom drain valve, constant pressure feeding tank, vertical and horizontal condensers, reflux pipeline and external receiving system, buffer tank and vacuum pump, solid plug port and safety valve. Other power supplies may be possible on request.

    Specify for your project

    • Nominal capacity: 50, 100, 200, 300 or 500 L
    • Design pressure (up to 250 bar for 50 to 200 L; 300 and 500 L on request) and temperature within 0 to 350 °C
    • Material: SS304, SS316 or another alloy
    • Heating: electric, thermal oil, steam or far infrared
    • Hazardous area classification for the control panel
    ModelCapacitySpeedMotor
    LEEPPR-5050 L0-500 rpm1.5 kW
    LEEPPR-100100 L0-500 rpm2.2 kW
    LEEPPR-200200 L0-450 rpm2.2 kW
    LEEPPR-300300 L0-450 rpm4 kW
    LEEPPR-500500 L0-450 rpm5.5 kW

    This description defines the product family. Guaranteed performance, included hardware, exclusions, interfaces and acceptance criteria are stated only in the project-specific technical proposal and approved datasheet.

    • Explosion Proof Pressure Reactor
  • Introduction

    • This series is widely used in scale up and small-scale production, pilot pressure autoclave.
    • Volume: 50liters-500liters.
    • Pressure: up to 250 bar for 50 to 200 L; 300 and 500 L on request
    • Temperature: Up to 350℃
    • Material:SS304, SS316, Hastelloy B/C, Nickel, Titanium, Zirconium, etc.
    • Heating method:Electric heating/Jacket heating
    • Seal type: Magnetic stirrer drives

    Features

    Salient Features

    • High torque magnetic coupling drives
    • With manual lifting devices, easy to open the heavy cover lid.
    • Pressure gauge display and temperature sensor.
    • Internal cooling coils with water tap;
    • Control panel with program PID temperature controller; explosion-protected version on request.
    • Gas/liquid inlet & outlet with needle valve control, dip tube, etc.

    Optional

    • Bottom drain valve.
    • Constant pressure feeding tank;
    • Vertical and horizontal condenser;
    • Reflux pipeline and external receving system;
    • Buffer tank & vaccum pump.

    Standard Specification

    Model No. LEEPPR-50 LEEPPR-100 LEEPPR-200 LEEPPR-300 LEEPPR-500
    Nominal Capacity 50 L 100 L 200 L 300 L 500 L
    Design Pressure -0.1 to 250 bar for 50 to 200 L (300 and 500 L on request)
    Material Clad SS304, SS316 or other alloys
    Design Temperature 0~350°C customized
    Stirring Speed 0-500 rpm 0-500 rpm 0-450 rpm 0-450 rpm 0-450 rpm
    Motor Power 1.5k W 2.2 kW 2.2 kW 4 kW 5.5 kW
    Heating Method Standard electric heating(Thermal oil, steam, far infrared heating available)
    Head type Flat cover or elliptical flange type
    Impeller type (Optional) Propeller, paddle, anchor, spiral, turbine, gas inducing type, etc
    Cooling type (Optional) Internal spiral cooling cools
    Discharging type (Optional) Discharging from bottom or up discharge by pressure.
    Control panel PID temperature display and control, accuracy±1 °С; Stirring speed display;
    Operation time display; Heating voltage and current display.
    Standard Pressure Gage; Thermocouple; Internal Stirring System
    Liquid inlet and gas inlet with needle valve
    Dip Tube; Safety Rupture Disc; Cooling Coil
    Optional Solid plug port, constant feeding tank, safety valve, external condenser,
    Reflux pipeline, drain valve, receiver, etc.

    Note

    • Customer is advised to select best suited options for most optimized price & delivery.
    • Customization of volume, material, pressure, temperature etc. may be possible on request.
    • Different power supply options may be possible on request.
Coretest