✓ In-house manufacturing — Hastelloy C276 & titanium✓ Custom engineering & prototypes✓ API / ASTM · CSA · CRN · CE✓ Serving US, Canada, EU, Middle East, Central Asia, Africa & LatAm

Electric Lifting Lab Pressure Reactors

  • LEELLPR reactors are stirred pressure vessels from 5L to 50L. The 5L, 10L and 20L models have an electric lifting device for the head; the lifting arrangement of the 30L to 50L models is confirmed on request. At this size the head and stirrer are too heavy to lift by hand, so the electric lift raises them for loading and cleaning. Users run hydrogenation, polymerization, synthesis, crystallization, catalyst testing and zeolite synthesis, and move from laboratory to pilot plant and small-scale production.

    Design

    A high torque magnetic coupling drives the stirrer without a packed gland. Standard design pressure is 100 bar and standard design temperature 350 °C. The head is a flat cover or an elliptical flange head. Electric heating is standard; thermal oil, steam or far infrared heating are available. Internal cooling coils with a water tap remove heat. The product discharges from the bottom or is pushed up by pressure. A program PID controller sets temperature and the panel displays stirring speed, operation time, heating voltage and current.

    • Material: SS304, SS316, Hastelloy B/C, Nickel, Titanium, Zirconium, other alloys
    • Impeller: propeller, paddle, anchor, spiral, turbine or gas inducing type
    • Standard fittings: pressure gauge, thermocouple, internal stirring system, liquid and gas inlets with needle valves, dip tube, rupture disc, cooling coil
    ModelNominal capacityStirring speedHeating power
    LEELLPR-55L0-750 rpm4 kW
    LEELLPR-1010L0-750 rpm9 kW
    LEELLPR-2020L0-500 rpm9-12 kW
    LEELLPR-3030L0-500 rpm12 kW
    LEELLPR-4040L0-500 rpm12 kW
    LEELLPR-5050L0-500 rpm15 kW

    Options

    • Bottom drain valve and solid plug port
    • Constant pressure feeding tank
    • Vertical and horizontal condensers, reflux pipeline and external receiving system
    • Buffer tank and vacuum pump
    • Safety valve

    Specify for your project

    • Nominal capacity, 5L to 50L
    • Design pressure and temperature
    • Material
    • Heating method
    • Condenser, feeding and vacuum options

    This description defines the product family. Guaranteed performance, included hardware, exclusions, interfaces and acceptance criteria are stated only in the project-specific technical proposal and approved datasheet.

    • Electric Lifting Lab Pressure Reactors
    • Electric Lifting Lab Pressure Reactors
  • Salient features

    • High torque magnetic coupling drives
    • Electric lifting devices(1-5liters, 10liters, 20liters)
    • Design pressure: standard 100 bar; up to 250 bar
    • Design temperature: standard 350 °C; up to 500 °C
    • Material:SS304, SS316, Hastelloy B/C, Nickel, Titanium, Zirconium, etc.
    • Heating method:Electric heating
    • Lifting type: Electric lifting
    • Seal type: Magnetic stirrer drives
    • Pressure gauge display and temperature sensor
    • Internal cooling coils with water tap
    • Control panel with program PID temperature controller
    • Gas/liquid inlet & outlet with needle valve control, dip tube, etc

    Optional

    • Bottom drain valve.
    • Constant pressure feeding tank;
    • Vertical and horizontal condenser;
    • Reflux pipeline and external receving system;
    • Buffer tank & vaccum pump.

    Standart specifications

    Model No. LEELLPR-5 LEELLPR-10 LEELLPR-20 LEELLPR-30 LEELLPR-40 LEELLPR-50
    Nominal Capacity 5L 10L 20L 30L 40L 50L
    Design Pressure Standard 100 bar Maximum pressure up to 250 bar
    Material SS304, SS316 or other alloys
    Design Temperature Standard 350 °C; Up to 500 °C
    Stirring Speed 0-750 rpm 0-750 rpm 0-500 rpm 0-500 rpm 0-500 rpm 0-500 rpm
    Motor Power 0.6 kW 1.1 kW 1.5 kW 1.5 kW 1.5 kW 1.5 kW
    Heating Power 4 kW 9 kW 9-12 kW 12 kW 12 kW 15 kW
    Heating Method Standard electric heating (Thermal oil. steam, far infrared heating available)
    Head type Flat cover type or elliptical flange head
    Impeller type (Optional) Propeller, paddle, anchor, spiral, turbine, gas inducing type, etc
    Cooling type (Optional) Internal spiral cooling cools
    Discharging type Discharging from bottom or up discharge by pressure.
    Control panel PID temperature display and control; Stirring speed display;
    Operation time display; Heating voltage and current display.
    Standard Pressure Gage; Thermocouple; Internal Stirring System
    Liquid inlet and gas inlet with needle valve
    Dip Tube; Safety' Rupture Disc; Cooling Coil
    Optional Solid plug port, constant feeding tank, safety valve, external condenser.
    Reflux pipeline, drain valve, receiver, etc.
Coretest