✓ In-house manufacturing — Hastelloy C276 & titanium✓ Custom engineering & prototypes✓ API / ASTM · CSA · CRN · CE✓ Serving US, Canada, EU, Middle East, Central Asia, Africa & LatAm

Steel Laboratory Reactor with a Fluoroplastic Coating

  • The Steel Laboratory Reactor with a Fluoroplastic Coating, LESR, is a 1 L jacketed tabletop reactor for products that must not touch borosilicate glass or bare metal. The steel vessel carries a protective fluoroplastic coating, the lid is PTFE, and the agitator, temperature sensor and other fittings are also fluoroplastic coated. Chemists use it for synthesis and process work at -20 to +200 °C under vacuum or atmospheric pressure.

    Design

    The vessel has an elliptical or flat bottom and a flat lid. A cooling and heating jacket connects to an external circulating thermostat, which is an option. The lid with all its elements is fixed on the stand, and the vessel can be disconnected and removed by hand or with a lift: manual winch, motorized winch or pneumatic. Fittings follow Lok, Tri-clamp and GL standards. The agitator seal is a gland, a mechanical seal or a magnetic coupling. The drive is chosen from the product viscosity, speed and volume, from a laboratory stirrer to a geared motor, with speeds up to 1000 rpm. Anchor, propeller and spiral agitators are available. The coating can also be applied to larger vessels up to 100 L.

    • Working volume: 1 L
    • Temperature: -20 to +200 °C
    • Pressure: vacuum to atmospheric
    • Maximum speed: 1000 rpm
    • Design: tabletop

    Options

    Direct or reflux condensers, dosing pumps, vacuum pumps, and sensors for temperature, pH, level and pressure, selected for the reactions to be run.

    Specify for your project

    • Working volume, 1 L or a larger coated vessel up to 100 L
    • Temperature range within -20 to +200 °C
    • Agitator type, seal and speed up to 1000 rpm
    • Bottom shape: elliptical or flat; no bottom outlet
    • Thermostat, condenser and sensors required

    This description defines the product family. Guaranteed performance, included hardware, exclusions, interfaces and acceptance criteria are stated only in the project-specific technical proposal and approved datasheet.

    • Steel Laboratory Reactor with a Fluoroplastic Coating
    • Steel Laboratory Reactor with a Fluoroplastic Coating
    • Steel Laboratory Reactor with a Fluoroplastic Coating
    • Steel Laboratory Reactor with a Fluoroplastic Coating
    • Steel Laboratory Reactor with a Fluoroplastic Coating
    • Steel Laboratory Reactor with a Fluoroplastic Coating
    • Steel Laboratory Reactor with a Fluoroplastic Coating
    • Steel Laboratory Reactor with a Fluoroplastic Coating
  • Features:

    • Vessel with an elliptical or flat bottom
    • Flat lid
    • Standard fittings: Lok, Tri-clamp, GL
    • Bottom outlet: absent
    • Agitator seal: gland, mechanical or magnetic coupling
    • Agitator drives are selected based on the viscosity of the product
    • The vessel can be removed manually or with the help of a lift.

    Specifications:

    • Working volume: 1 L
    • Max speed: 1000 rpm.
    • Type of agitator: anchor, propeller, spiral (or other).
    • Type of heating/cooling: external circulatory thermostat (option).
    • Operating temperature: -20...+200°C
    • Operating pressure: vacuum...atmospheric
    • Cooling/heating jacket: present
    • Bottom shape: elliptical or flat
    • Bottom outlet: absent
    • Design: tabletop

    The protective coating can also be applied to larger vessels (up to 100 L).

Coretest