Stainless Steel Laboratory Reactor with an Immersion Disperser
Send a request
Stainless Steel Laboratory Reactor with an Immersion Disperser
The LESSR is a 2 L tabletop stainless steel reactor with a conical bottom and an immersion disperser, built to make a homogeneous paste in the laboratory. The cone shape makes it easier to unload viscous or paste-like products, and an anchor stirrer with scrapers keeps the product moving off the walls while the disperser homogenizes it.
Design
A circulating thermostat pumps heat transfer fluid through the reactor jacket for heating or cooling. Working temperature is -20 to +200°C and working pressure is from vacuum to atmospheric. This configuration has no thermal insulation; an insulation layer can be added to keep the operator away from a hot surface. The lid with all elements is fixed on the stand, and the vessel can be detached and removed.
- Working volume: 2 L
- Steel grade of wetted parts: on request
- Agitator: anchor with scrapers, up to 500 rpm
- Immersion disperser: laboratory or industrial type, depending on volume
- Bottom drain: ball valve, no dead space
- Mixer seal: gland, mechanical seal or magnetic coupling
- Flat cover with Lok, Tri-clamp or GL connections
Options
- Vessel lift: manual hoist, motorized hoist or pneumatic lift
- Straight or reflux condensers
- Dosing pumps or vacuum pumps
- Temperature, pH, level and pressure sensors
- Thermal insulation of the vessel
Specify for your project
- Product type and viscosity
- Temperature range within -20 to +200°C and thermostat
- Disperser size
- Mixer seal type
- Insulation and vessel lift requirement
This description defines the product family. Guaranteed performance, included hardware, exclusions, interfaces and acceptance criteria are stated only in the project-specific technical proposal and approved datasheet.
Features:
- Conical bottom
- Flat cover
- Standard mountings: Lok, Tri-clamp, GL
- Bottom drain without dead space
- Mixer seal: gland, mechanical or magnetic coupling
- Mixer drives are selected based on the viscosity of the product
- Vessel can be removed manually or with the help of a lift.
Specifications
- Working volume: 2 L
- Steel grade of wetted parts: on request
- Working temperature: -20…+200°C
- Working pressure: vacuum… atmospheric
- Jacket for heat transfer medium: available
- Thermal insulation: none
- Max. speed: 500 rpm
- Bottom drain: ball valve
- Type of agitator: anchor
- Type of heating/cooling: external thermostat
- Design: tabletop.























