Non Stirred Pressure Autoclave Reactor with Flowmeter and Thermostatic
Send a request
Non Stirred Pressure Autoclave Reactor with Flowmeter and Thermostatic
The LENSPARFT is a laboratory pressure autoclave with gas mass flow control, sampling and a digital pressure sensor, mounted on a mobile frame with wheels. Nominal capacity runs from 0.5 L to 5 L. Research and catalyst laboratories use it for gas-liquid reactions where the gas feed must be metered and recorded.
Design
The flat cover is fixed, and the closure is a bolted flange. The vessel is raised pneumatically and rotated by hand for discharge. Working pressure is -1 (full vacuum) to +100 bar, 10 MPa. The reactor is charged from above and cooled by internal spiral coils. A PID controller holds temperature with an accuracy of ±1 ℃, and the panel shows temperature, time and heating voltage. The unit has an RS485 interface.
Standard fittings
- Pressure gauge and thermocouple
- Liquid inlet and gas inlet with needle valves, gas release valve
- Dip tube, safety rupture disc, cooling coil
- Gas mass flow controller, sampling device, digital pressure sensor
Model Nominal capacity (L) Heating power (kW) LENSPARFT-0.5 0.5 1 LENSPARFT-1 1 2 LENSPARFT-2 2 2 LENSPARFT-3 3 3 LENSPARFT-5 5 4 Typical applications
- Hydrogenation, catalyst screening and testing
- Polymerization, styrene butadiene
- Alkoxylation, ethoxylation
- Hydrocracking, dehydrogenation, oxidation
- Fluid catalytic cracking, biojet fuel production
Specify for your project
- Nominal capacity, 0.5 to 5 L
- Pressure up to +100 bar
- Material: SS304 or SS316
- Gas flow range for the mass flow controller
- Temperature range and heating or thermostating method
This description defines the product family. Guaranteed performance, included hardware, exclusions, interfaces and acceptance criteria are stated only in the project-specific technical proposal and approved datasheet.
Features
- Reactor volume: 0.5-5 liters
- Pressure: -1 (FV) to +100 bar
- Working temperature: 350 °C
- Material: Stainless steel 304/316
- Flat cover lid: Fixed
- Closure type: Flange type with bolts closure
- Reactor vessel: Lifting and rotate
- Other devices: Euipped with flow gas mass meter control, sampling devices, general electric heating, digital pressure sensor, pneumatic lifting, manual rotate devices, moveable wheels,RS485 control, etc.
- Control: PID temperature control
Specification
Model No. LENSPARFT-0.5 LENSPARFT-1 LENSPARFT-2 LENSPARFT-3 LENSPARFT-5 Nominal Capacity (L) 0.5 1 2 3 5 Working Pressure (MPa) 10 10 10 10 10 Working Temperature (℃) 350 350 350 350 350 Heating Power (kW) 1 2 2 3 4 Material SS304 or SS316 Heating Method General electric heating Cooling Method Internal spiral coils Charging Method Charging from above Control panel Temperature, time and heating voltage display
Temperature adjustment control, accuracy±1 ℃Standard fittings Pressure Gage; Thermocouple
Liquid inlet and gas inlet with needle valve;Gas Release Valve
Dip Tube; Safety Rupture Disc; Cooling Coil









