20 L Steel Reactor with Software Control LESRSW20
Send a request
20 L Steel Reactor with Software Control LESRSW20
The Steel Reactor with Software, LESRSW20, is a 20 L floor-standing jacketed reactor run from process control software. Pilot and scale-up laboratories use it to automate synthesis runs at -20 to +200 °C and from vacuum to +3 bar. The user programs the process directly in the software, which is adapted to common laboratory instruments. For special set-ups with floor scales, extra sensors or flow meters, a dedicated process control module can be developed on request.
Design
The steel vessel has an elliptical bottom, a flat lid, a heat transfer jacket and a layer of insulation. The jacket connects to an external circulating thermostat, available as an option. The bottom outlet is a ball valve without dead volume. The lid with its fittings is fixed on the stand, and the vessel is lowered and raised by a pneumatic lift for cleaning and discharge. Fittings follow Lok, Tri-clamp and GL standards. The agitator seal is a gland, mechanical seal or magnetic coupling. The drive is sized from product viscosity, speed and volume, up to 1000 rpm, with anchor, propeller or spiral agitators.
- Working volume: 20 L
- Temperature: -20 to +200 °C
- Pressure: vacuum to +3 bar
- Maximum speed: 1000 rpm
- Design: floor-standing, pneumatic lift
- Control: software
Options
Direct or reflux condensers, dosing pumps, vacuum pumps, and sensors for temperature, pH, level and pressure. The external circulating thermostat is also an option.
Specify for your project
- Process steps to be automated and instruments to connect
- Temperature range within -20 to +200 °C
- Pressure within vacuum to +3 bar
- Agitator type, seal and drive
- Condensers, pumps and sensors required
This description defines the product family. Guaranteed performance, included hardware, exclusions, interfaces and acceptance criteria are stated only in the project-specific technical proposal and approved datasheet.
Features:
- Vessel with an elliptical bottom
- Flat lid
- Standard fittings: Lok, Tri-clamp, GL
- Bottom outlet without a dead volume
- Agitator seal: gland, mechanical or magnetic coupling
- Agitator drives are selected based on the viscosity of the product
- The vessel can be removed manually or with the help of a lift.
Specifications:
- Max speed: 1000 rpm
- Type of agitator: anchor, propeller, spiral (or other)
- Type of heating/cooling: external circulatory thermostat (option)
- Working volume: 20 L
- Operating temperature: -20...+200°C
- Operating pressure: vacuum...+3 bar
- Cooling/heating jacket: present
- Insulation: present
- Bottom shape: elliptical
- Bottom outlet: ball valve
- Design: floor-standing
- Lowering of the vessel: pneumatic lift
- Control: software.























