Steel Chemical Reactor with Electric Heating
Send a request
Steel Chemical Reactor with Electric Heating
Electric heating elements fixed to the cylindrical shell take the LESCREH steel chemical reactor up to 300°C without a jacket circuit. It is a floor-standing 100 L vessel with an elliptical bottom, used in chemical laboratories and pilot work where viscous products are processed at temperatures above the range of a liquid thermostat.
Design
The vessel is fixed on the frame. For access, the flat lid with its fittings is raised by a manual lift-lever. The shell carries thermal insulation. Working temperature is -20 to +300°C and working pressure is from vacuum to atmospheric. The elliptical bottom has an outlet without dead volume and a ball valve drain.
- Spiral agitator for viscous products; anchor and propeller agitators are also listed
- Maximum speed: 1000 rpm
- Agitator seal: gland, mechanical seal or magnetic coupling
- Drive: selected from product viscosity, working speed and volume, from a laboratory stirrer to a motor gearbox
- Standard connections: Lok, Tri-clamp, GL
- Steel grade of vessel and wetted parts: on request
Options
Depending on the reaction, the reactor can be fitted with direct or reflux condensers, dosing pumps or vacuum pumps, and temperature, pH, level and pressure sensors.
Specify for your project
- Product viscosity and agitator type
- Process temperature within -20 to +300°C
- Pressure: vacuum to atmospheric
- Lid lifting arrangement
- Agitator seal type
- Condensers, pumps and sensors required
This description defines the product family. Guaranteed performance, included hardware, exclusions, interfaces and acceptance criteria are stated only in the project-specific technical proposal and approved datasheet.
Features:
- Vessel with an elliptical bottom
- Flat lid
- Standard fittings: Lok, Tri-clamp, GL
- Bottom outlet without a dead volume
- Agitator seal: gland, mechanical or magnetic coupling
- Agitator drives are selected based on the viscosity of the product
- The vessel can be removed manually or with the help of a lift.
Specifications:
- Max speed: 1000 rpm
- Type of agitator: anchor, propeller, spiral (or other)
- Working volume: 100 L
- Steel grade of vessel and wetted parts: on request
- Working temperature: -20 ... +300°C
- Working pressure: vacuum ... atmospheric
- Jacket for heat transfer fluid: none
- Thermal insulation: present
- Bottom shape: elliptical
- Bottom drain: ball valve
- Design: floor-standing
- Lowering of the vessel: not applicable (fixed vessel)
- Lifting of the lid: manual lift-lever



















