Steel Pressure Reactors to 300 L and 700 bar LESHPRP
Send a request
Steel Pressure Reactors to 300 L and 700 bar LESHPRP
LESHPRP steel high-pressure reactors are stirred and unstirred pressure vessels for chemical reactions at high pressure and temperature, including supercritical conditions. The family runs from small tabletop vessels to floor-standing reactors with a lift and nominal volumes of 100 to 300 l. Working pressure goes up to 700 bar, depending on model and material.
Design
- Drive: the mixing element connects to the drive through a magnetic coupling, so there is no packed shaft seal. Element type and drive power are chosen for the task.
- Body material: chosen for the aggressiveness of the medium: AISI 316L or 316Ti stainless steel, AISI 660, titanium, or Hastelloy C22, C276 and B3.
- Lid seal: ring or metal-to-metal. Ring material is Viton, Kalrez, PTFE or metal, depending on temperature and medium.
- Lid attachment: hex nut, cam lock clamp, or high-strength studs and nuts, depending on model.
- Temperature measurement: PT100, type N or type K sensor in a sealed immersion tube, reading directly in the working medium.
- Heating and cooling: electric heating elements of 3 to 7 kW in an aluminum jacket, or a jacket for a circulating thermostat. Cooling is by a built-in coil or an external thermostat.
- Control: the controller connects to a computer, shows the process in real time and saves temperature, pressure and mixing speed curves.
Models
Model Placement Working temperature Speed LESHPRP-V tabletop -20 to 200 °C no stirrer LESHPRP-S tabletop -20 to 200 °C 0 to 1500 RPM LESHPRP-B tabletop -20 to 250 °C 0 to 2000 RPM LESHPRP-TW tabletop -20 to 350 °C 0 to 2000 RPM LESHPRP-P tabletop, 125 ml to 1 l -20 to 300 °C 200 to 3000 RPM LESHPRP-PR floor-standing, 2 to 10 l -20 to 350 °C 200 to 3000 RPM LESHPRP-PY floor-standing, 15 to 100 l -20 to 350 °C 200 to 2000 RPM LESHPRP-H floor-standing, 100 to 300 l -20 to 230 °C 0 to 550 RPM Options
- pH sensor, infrared sensor and level sensor
- Rotating cell for a catalyst
- Bottom drain (S, P, PR, PY and H models)
- Explosion protection (PY and H models)
Specify for your project
- Nominal volume and placement: tabletop or floor-standing with lift
- Maximum working pressure, up to 700 bar
- Working temperature range for the chosen model
- Body and lid seal material for the medium
- Heating type: electric jacket or circulating thermostat
- Sensors, bottom drain and explosion protection
This description defines the product family. Guaranteed performance, included hardware, exclusions, interfaces and acceptance criteria are stated only in the project-specific technical proposal and approved datasheet.
Detailed volumes and pressure ratings for models LESHPRP-V, LESHPRP-S, LESHPRP-B and LESHPRP-TW are provided on request.
Model LESHPRP-P LESHPRP-PR LESHPRP-PY LESHPRP-H Nominal volume: 125 ml, 250 ml, 2, 3, 5, 7, 10 l 15 … 100 l 100 … 300 l 380 ml, 500ml, 1 l Working temperature: -20… 300 °С -20… 350 °С -20 … 350°С -20 … 230°С Max. working pressureе: 100 bar 100 bar 100 bar 80 bar 200 bar 200 bar 325 bar 325 bar 700 bar Material: AISI 316L, 316Ti, AISI 316L, 316Ti, AISI 316L, 316Ti, AISI 316L, 316Ti, AISI 660, Titanium AISI 660, Titanium AISI 660, Titanium AISI 660, Titanium Hastelloy C22, C276, B3 Hastelloy C22, C276, B3 Hastelloy C22, C276, B3 Hastelloy C22, C276, B3 Speed 200 … 3000 RPM 200 … 3000 RPM 200 … 2000 RPM 0 … 550 RPM Shaft seal: magnetic coupling magnetic coupling magnetic coupling magnetic coupling lid attachment: cam lock clamp / bolts with nuts bolts with nuts bolts with nuts bolts with nuts Sealing of the lid: ring/metal-to-metal ring/metal-to-metal ring/metal-to-metal ring/metal-to-metal Bottom drain: option option option option Placement: tabletop floor-standing floor-standing floor-standing Lift + + + + Explosion protection: - - possible possible

























