Stainless Steel High Pressure Labratory Chemical Reactor
Send a request
Stainless Steel High Pressure Labratory Chemical Reactor
The LESSHPLCR stainless steel high pressure laboratory chemical reactor is a stirred autoclave with a condensing and recovery system. It runs chemical reactions under high pressure, high vacuum and high temperature, for example biodiesel processing. A double condenser and recovery tank collect vapor, so the unit also handles distillation steps. It is built on a floor stand or a movable cart.
Design
- Closure: quick open design, split clamp with clamp bolts. Charging from above.
- Drive: low to high torque magnetic coupling (static seal, no rotating shaft seal). Mechanical seal is also available. Direct drive or belt drive.
- Impeller: propeller, paddle or anchor type, or custom.
- Heating: electric heating as standard. Water circulation or thermal oil heating are available.
- Cooling: internal spiral coil. Single or serpentine coils are available.
- Control: PID control. Display of temperature, time and heating voltage, temperature control accuracy ±1 ℃, stirring speed display and control. Temperature, pressure, motor speed and level can be monitored.
- Materials: SS304, SS316, Titanium, Nickel, Hastelloy B/C, Monel, Zirconium, Inconel, Tantalum.
Standard models
Model Capacity Motor power Heating power LESSHPLCR-0.5 0.5 L 0.15 kW 1 kW LESSHPLCR-1 1 L 0.2 kW 2 kW LESSHPLCR-2 2 L 0.2 kW 2 kW LESSHPLCR-3 3 L 0.2 kW 3 kW LESSHPLCR-5 5 L 0.6 kW 4 kW All standard models: working pressure 10 MPa, working temperature 350 ℃, stirring speed 0 to 1500 r/min.
What is included
Pressure gauge, thermocouple, internal stirring system, liquid inlet and gas inlet with needle valve, gas release valve, dip tube, safety rupture disc and cooling coil. The condensing recovery system is configured per order: condenser type and quantity, cooling area, and receiver type, volume and quantity.
Specify for your project
- Model and capacity, 0.5 to 5 L
- Material of construction for the chemistry
- Impeller type, drive type and seal
- Heating method: electric, water or thermal oil
- Condenser and receiver configuration
- Floor stand or movable cart
This description defines the product family. Guaranteed performance, included hardware, exclusions, interfaces and acceptance criteria are stated only in the project-specific technical proposal and approved datasheet.
Product Features
- Floor stands or moveable cart type.
- Laboratory autoclaves with 500 ml to 5 liters volume.
- Working pressure: 10 MPa; Working temperature: 350 ℃
- Low to high torque magnetic couplings: static seal with no leakage.
- Equipped with double condenser and recovery tank for vapor condensation recovery.
- Available material:SS304, SS316, Titanium, Nickel, Hastelloy B/C, Monel, Zirconium, Inconel, Tantalum.
- Smooth run, low noise and easy operation.
- Monitor and control: Temperature, pressure, motor speed, level, etc
- Safety Device (Blasting Disc) on Security Blasting Port.
- Customized according to customers requirement.
Standard specifications
Model No. LESSHPLCR-0.5 LESSHPLCR-1 LESSHPLCR-2 LESSHPLCR-3 LESSHPLCR-5 Nominal Capacity (L) 0.5 1 2 3 5 Working Pressure (MPa) 10 10 10 10 10 Working Temperature(℃) 350 350 350 350 350 Stirring Speed (r/min) 0-1500 0-1500 0-1500 0-1500 0-1500 Motor power (kW) 0.15 0.2 0.2 0.2 0.6 Heating Power (kW) 1 2 2 3 4 Heating Method General electric heating(water recycling, thermal oil heating available) General electric heating(water recycling, thermal oil heating available) General electric heating(water recycling, thermal oil heating available) General electric heating(water recycling, thermal oil heating available) General electric heating(water recycling, thermal oil heating available) Cooling Method Spiral coils(Single coils, serpentine coils available) Spiral coils(Single coils, serpentine coils available) Spiral coils(Single coils, serpentine coils available) Spiral coils(Single coils, serpentine coils available) Spiral coils(Single coils, serpentine coils available) Charging Method Charging from above Charging from above Charging from above Charging from above Charging from above Stirring type Propeller, paddle type, anchor type or customized Propeller, paddle type, anchor type or customized Propeller, paddle type, anchor type or customized Propeller, paddle type, anchor type or customized Propeller, paddle type, anchor type or customized Control panel Temperature, time and heating voltage display; Temperature adjustment control, accuracy±1 ℃; Stirring speed display and control Temperature, time and heating voltage display; Temperature adjustment control, accuracy±1 ℃; Stirring speed display and control Temperature, time and heating voltage display; Temperature adjustment control, accuracy±1 ℃; Stirring speed display and control Temperature, time and heating voltage display; Temperature adjustment control, accuracy±1 ℃; Stirring speed display and control Temperature, time and heating voltage display; Temperature adjustment control, accuracy±1 ℃; Stirring speed display and control Standard fittings Pressure Gage; Thermocouple; Internal Stirring System; Liquid inlet and gas inlet with needle valve;Gas Release Valve; Dip Tube; Safety Rupture Disc; Cooling Coil Pressure Gage; Thermocouple; Internal Stirring System; Liquid inlet and gas inlet with needle valve;Gas Release Valve; Dip Tube; Safety Rupture Disc; Cooling Coil Pressure Gage; Thermocouple; Internal Stirring System; Liquid inlet and gas inlet with needle valve;Gas Release Valve; Dip Tube; Safety Rupture Disc; Cooling Coil Pressure Gage; Thermocouple; Internal Stirring System; Liquid inlet and gas inlet with needle valve;Gas Release Valve; Dip Tube; Safety Rupture Disc; Cooling Coil Pressure Gage; Thermocouple; Internal Stirring System; Liquid inlet and gas inlet with needle valve;Gas Release Valve; Dip Tube; Safety Rupture Disc; Cooling Coil Condensing recovery system customization:
- Condenser type and quantity
- Cooling area(m2)
- Receiver type, volume and quantity
Product details

Control system

Internal components


















