Stainless Steel Chemical Reactor with Heating Jacket & Insulation
Send a request
Stainless Steel Chemical Reactor with Heating Jacket & Insulation
Typical Applications
- Hydrogenation reactor;
- Polymerization reactor;
- Synthesis reactor;
- Catalyst testing / evaluation;
- Catalytic reactor
- Crystallization;
- Chemical development.
- Hydrogenation reactor;
- Polymerization reactor;
- Synthesis reactor;
- Catalyst testing / evaluation;
- Catalytic reactor
- Crystallization;
- Chemical development.
Models: LESSCRHJI, LESSCRHJI-50, LESSCRHJI-100, LESSCRHJI-200, LESSCRHJI-300, LESSCRHJI-500
Introduction
- Top elliptical head with flange mounting;
- Volume: 600liters
- Maximum Pressure: -1 (FV) to +4 bar;
- Maximum Temperature: -100 °C to +100 °C;
- Material:SS304, SS316, Hastelloy C276, Nickel, Titanium, Zirconium, etc;
- Heating jacket: Conventional Jacket
- Internal cooling coils:2.2m2 cooling area
- Seal type:Mechanical seal
- Agitator:4KW, Two stage Paddle,0-120rpm
Features
Standard
- Electric oil heating method;
- Zero leakage magnetic drive or mechanical seal;
- Variable speed motor and gear drive;
- Stirring shaft and stirrer assembly
- Internal spiral cooling coil;
- Reasonable customize the nozzle port and orientation, including:Liquid inlet, gas inlet, solid inlet, safety device, vent outlet... etc.
- Different impeller type available for specific mixing mission.
- stainless steel chemical reactor 600liters reactor chemical reactor
Optional
- Oil circulate jacket heating; Steam heating;
- Hoist for reactor head (manual or electric options);
- Bottom drain valve ;
- Insulation jacket;
- Safety valve;
- Top close type or Top open type;
- Top head type: Flat head; Elliptical flanged head
Parameters
Model No. LESSCRHJI-50 LESSCRHJI-100 LESSCRHJI-200 LESSCRHJI-300 LESSCRHJI-500 Nominal Capacity 50 L 100 L 200 L 300 L 500 L Design Pressure -0.1-250 bar customized Material Clad SS304, SS316 or other alloys Design Temperature 0~350°C customized Stirring Speed 0-500 rpm 0-500 rpm 0-450 rpm 0-450 rpm 0-450 rpm Motor Power 1.5 kW 2.2 kW 2.2 kW 4 kW 5.5 kW Heating Method Standard electric heating (Thermal oil, steam, far infrared heating available) Head type Flat cover or elliptical flange type Impeller type (Optional) Propeller, paddle, anchor, spiral, turbine, gas inducing type, etc Cooling type (Optional) Internal spiral cooling cools Discharging type (Optional) Discharging from bottom or up discharge by pressure. Control panel PID temperature display and control, accuracy±1 °С; Stirring speed display; Operation time display; Heating voltage and current display. Standard Pressure Gage; Thermocouple; Internal Stirring System Liquid inlet and gas inlet with needle valve Dip Tube; Safety Rupture Disc; Cooling Coil Optional Solid plug port, constant feeding tank, safety valve, external condenser, Reflux pipeline, drain valve, receiver, etc.









