Laboratory Autoclave 2500 mL, 200 bar LELARVH20K3
Send a request
Laboratory Autoclave 2500 mL, 200 bar LELARVH20K3
The LELARVH20K3 is a laboratory autoclave for tests with rotating samples (coupons) at high pressure and temperature. A 2500 ml reactor holds the medium, and a sample holder (cell) turns the coupons inside it. Temperature and pressure are monitored in real time during the run. Corrosion and materials labs use it to expose coupons to a moving fluid at up to 200 bar and 305 °C.
How it works
The coupons sit in a holder that is driven through a magnetic coupling. The drive passes torque through the vessel wall, so there is no rotating shaft seal at the pressure boundary. The holder speed is adjustable from 0 to 2000 rpm, with a magnetic clutch torque of 0.75 N*m. The vessel is raised and lowered by a pneumatic lift that runs on compressed air at up to 6 bar.
All parts in contact with the medium are made of corrosion-resistant C276 Hastelloy, PTFE and PEEK. Live temperature and pressure readings let the operator follow how the test develops and predict its behavior.
Main characteristics
Parameter Value Internal volume of the reactor 2500 ml Working pressure 20 MPa (200 bar) Design pressure 45 MPa Maximum temperature 305 °C Wetted materials C276 Hastelloy, PTFE, PEEK Sample holder speed 0 to 2000 rpm Magnetic clutch torque 0.75 N*m Power consumption not more than 3.0 kW Pneumatic lift air pressure max. 6 bar Total weight 300 kg Dimensions, W x H x D 1400 x 1900 x 700 mm Specify for your project
- Test pressure up to the 20 MPa working pressure
- Test temperature up to 305 °C
- Coupon size, number and holder layout
- Rotation speed range within 0 to 2000 rpm
- Test medium, to confirm compatibility with Hastelloy C276, PTFE and PEEK
- Available compressed air supply for the lift
This description defines the product family. Guaranteed performance, included hardware, exclusions, interfaces and acceptance criteria are stated only in the project-specific technical proposal and approved datasheet.
Main characteristics:
- Internal volume of the reactor, ml - 2500
- Working pressure, MPa - 20
- Design pressure, MPa - 45
- Maximum temperature, °C - 305
- Materials in contact with the medium - Corrosion-resistant steel C276 Hastelloy, PTFE, PEEK
- Power consumption, not more than, kW - 3.0
- Magnetic clutch torque, N*m - 0.75
- Rotation speed of the sample holder, rpm - 0-2000
- Maximum compressed air pressure for the pneumatic lift, bar - 6
- Total weight, kg - 300
- Dimensions, WxHxD mm - 1400x1900x700











