Lab Pressure Reactor with External Condener and Receiver
Send a request
Lab Pressure Reactor with External Condener and Receiver
The LELPRECR lab pressure reactor is a stirred autoclave packaged with a feed and recovery train. A constant pressure dosing tank feeds liquid into the vessel during the reaction. Vapor leaves through external vertical and horizontal condensers into a receiver and collecting tank. Labs use it for hydrogenation, polymerization and other reactions that need controlled feeding or distillation under pressure.
Design
- Lid: flat cover with lifting and lowering function.
- Closure: flange type with bolts.
- Shaft seal: magnetic coupling drive, no packed gland.
- Vessel: rotates for emptying and cleaning. Charging from above.
- Feed and recovery: constant pressure dosing tank, vertical and horizontal condensers, receiver with control element, collecting tank.
- Pressure: -1 (FV) to +100 bar, working pressure 10 MPa.
- Material: stainless steel 304/316, Hastelloy C276 or Titanium.
- Heating and cooling: electric heating, internal spiral cooling coil.
- Control: PID temperature control with ±1 ℃ accuracy, temperature, time and heating voltage display, stirring speed display and control.
Typical applications
- Hydrogenation, catalyst screening and testing
- Polymerization, styrene butadiene
- Alkoxylation and ethoxylation
- Distillation
- Hydrocracking, dehydrogenation, oxidation
- Fischer Tropsch, carboxylation, fluid catalytic cracking
- Biojet fuel production
Models
Model Capacity Motor power Heating power LELPRECR-0.5 0.5 L 0.15 kW 1 kW LELPRECR-1 1 L 0.2 kW 2 kW LELPRECR-2 2 L 0.2 kW 2 kW LELPRECR-3 3 L 0.2 kW 3 kW LELPRECR-5 5 L 0.6 kW 4 kW All models: stirring speed 0 to 1500 r/min, propeller, paddle, anchor or custom stirrer. Standard fittings: pressure gauge, thermocouple, internal stirring system, liquid and gas inlets with needle valve, gas release valve, dip tube, safety rupture disc and cooling coil.
Specify for your project
- Capacity, 0.5 to 5 L
- Working pressure up to 10 MPa, and vacuum duty
- Vessel material: 304/316, Hastelloy C276 or Titanium
- Dosing tank volume and feed rate
- Condenser and receiver arrangement
This description defines the product family. Guaranteed performance, included hardware, exclusions, interfaces and acceptance criteria are stated only in the project-specific technical proposal and approved datasheet.
Features:
- Flat cover lid: Lifting & lowering functions
- Closure type: Flange type with bolts closure
- Shaft seal: Magnetic coupling drive Reactor vessel: Equipped with rotate functions
- Other devices: Euipped with constant pressure dosing tank, vertical & horizontal condenser, receiver, collecting tank
- Control: PID temperature control
- Reactor volume: 0.5-5 liters
- Pressure: -1 (FV) to +100 bar
- Working temperature: 350 °C
- Material: SS304 or SS316
- Euipped with external horizontal & vertical condenser, receiver with control element
- Euipped with constant feeding devices
Specification:
Model No. LELPRECR-0.5 LELPRECR-1 LELPRECR-2 LELPRECR-3 LELPRECR-5 Nominal Capacity (L) 0.5 1 2 3 5 Working Pressure (MPa) 10 10 10 10 10 Working Temperature (℃) 350 350 350 350 350 Stirring Speed (r/min) 0-1500 0-1500 0-1500 0-1500 0-1500 Motor power (kW) 0.15 0.2 0.2 0.2 0.6 Heating Power (kW) 1 2 2 3 4 Material SS304 or SS316 Heating Method General electric heating Cooling Method Internal spiral coils Charging Method Charging from above Stirring type Propeller, paddle type, anchor type or customized Control panel Temperature, time and heating voltage display
Temperature adjustment control, accuracy±1 ℃
Stirring speed display and controlStandard fittings Pressure Gage; Thermocouple; Internal Stirring System
Liquid inlet and gas inlet with needle valve;Gas Release Valve
Dip Tube; Safety Rupture Disc; Cooling Coil









