Hydrothermal Synthesis Reactors
Send a request
Hydrothermal Synthesis Reactors
The LEHTSR hydrothermal synthesis reactor is a closed digestion vessel for breaking down poorly soluble substances. It is also called a high pressure digestion tank, pressure bomb or reaction kettle. Analytical labs use it to prepare samples with strong acid or alkali at high temperature and pressure. Synthesis labs use it for small-dose reactions. Standard volumes run from 5 ml to 1000 ml.
How it works
The sample and the digestion reagent go into a PTFE or PPL liner. The liner sits in a stainless steel body that closes with a thread connection. The closed vessel is heated, and the sealed volume keeps the acid or alkali and the vapor inside at elevated pressure. This gives fast digestion of materials that dissolve slowly in open vessels, with little reagent and no loss of volatile elements. Rated limits are 30 bar and 200 ℃, with a heating and cooling speed of 5 ℃/min or less.
Specifications
- Volumes: 5, 10, 25, 30, 50, 100, 150, 200, 250, 300, 400, 500 and 1000 ml
- Body: SS304 or SS316
- Liner: PTFE or PPL, acid resistant
- Rating: 30 bar, 200 ℃
- Heating and cooling speed: 5 ℃/min or less
- Closure: thread connection
Typical applications
- Sample pretreatment for atomic absorption, atomic fluorescence, plasma emission and plasma mass spectrometry, gas and liquid phase methods
- Trace element and heavy metal determination: lead, copper, cadmium, zinc, calcium, manganese, iron, mercury
- Digestion of pesticide residues, food, sludge, rare earths, aquatic products and organic matter
- Organic synthesis, hydrothermal synthesis and crystal growth
- Sample digestion and extraction in petrochemical, biomedical, materials, geochemistry, environmental and food science labs, and in commodity inspection
Specify for your project
- Volume from the standard list, 5 ml to 1000 ml
- Body material: SS304 or SS316
- Liner: PTFE or PPL, matched to the reagents
- Required temperature and pressure within 200 ℃ and 30 bar
- Number of vessels and any custom design
This description defines the product family. Guaranteed performance, included hardware, exclusions, interfaces and acceptance criteria are stated only in the project-specific technical proposal and approved datasheet.
Product features
- Laboratory autoclaves with 5ml to 1 liters volume.
- Max pressure: 30bar; Max temperature up to 200 ℃
- Tempe heating and cooling speed: ≤ 5℃/ min
- PTFE lined and PPL lined are available, resistance to acid.
- High safety, easy operation, use little solvent, nice appearance.
- Available material:SS304, SS316
- Customized according to customers requirements.
Specifications
Volume
5ml; 10ml; 25ml; 30ml; 50ml; 100ml; 150ml; 200ml; 250ml; 300ml; 400ml; 500ml; 1000ml
Material
SS304 or SS316 ; Liner: PTFE or PPL
Specification
30 bar; 200℃; ≤ 5℃/ min;Thread connect
Product details













