High Pressure Single Reactors
Send a request
High Pressure Single Reactors
LEHPSR high pressure single reactors are compact bench top vessels that sit on a standard magnetic hotplate stirrer. Heating and agitation come from the hotplate and a magnetic stirrer bar, so no oil bath is needed. Chemists use them for homogeneous and heterogeneous catalysis and for hydrogenation through the gas feed. In the small and mid-size models the whole vessel lifts out of the heater by hand, which makes charging, product recovery and cleaning simple.
Design
- Heating and mixing: magnetic hotplate stirrer with a magnetic flea, as standard.
- Mounting: an adapter base locates the reactor securely on the hotplate.
- Temperature control: PT100 sensor.
- Gas feed: gas insertion port for hydrogenation reactions.
- Safety: fail safe mechanism, optional bursting disc.
- Materials: 316 stainless steel or Hastelloy C276, other options on request.
- Vessel volumes and temperature limits: on request for each model.
Pressure ratings
Version Design pressure Operating pressure Standard low pressure 55 barg 50 barg Standard high pressure 200 barg 180 barg Each reactor is built to order. The gauge can be moved to allow higher temperatures than usual, port fittings can be changed to suit the user's apparatus, and other small changes can be made. A fully bespoke reactor system is also available.
Options
- Multi-position inserts and reduction inserts
- Borosilicate or PTFE vessel liners
- Alternative o-rings for temperature range and chemical resistance
- Bursting disc
- Relocated gauge and modified port fittings
Specify for your project
- Vessel size from the standard range
- Pressure rating: 50 barg or 180 barg operating
- Body material: 316 stainless steel, Hastelloy C276 or other
- Liner and o-ring material for the chemistry and temperature
- Inserts, port fittings and gauge position
This description defines the product family. Guaranteed performance, included hardware, exclusions, interfaces and acceptance criteria are stated only in the project-specific technical proposal and approved datasheet.
Technical Specifications
- Heating and agitation via magnetic hotplate stirrer as standard with magnetic flea
- Temperature control via PT100
- Secure fitment to your hotplate via adapter
- Fail safe mechanism and optional bursting disc
- Ideal for homogeneous and heterogeneous catalysis studies
- Gas insertion feed excellent for hydrogenation reactions
- Clean, safe synthesis without the requirement of oil as your heating media
- Standard low pressure models have design pressure of 55 barg, operating pressure of 50 barg.
- Standard high pressure models have design pressure of 200 barg, operating pressure of 180 barg.
- 316 stainless steel or Hastelloy C276 but other options available upon request
- Reduction inserts available if required
- Vessel volumes and temperature limits for the 50 barg and 180 barg models: on request













