High Pressure Hydrothermal Synthesis Reactors
Send a request
High Pressure Hydrothermal Synthesis Reactors
The LEHPHTSR high pressure hydrothermal synthesis reactor is a non stirred laboratory autoclave, also called a polymerization reactor. A stainless steel body holds a removable PTFE or PPL liner that contains the sample. Labs use it for catalyst preparation, crystal growth, polymer synthesis and other experiments that need a closed vessel at elevated pressure and temperature. Volumes run from 30 ml to 1000 ml.
How it works
The reaction mixture is loaded into the liner, the liner goes into the steel body and the body is closed. The sealed reactor is then heated in an external oven or heater. As the temperature rises, the vapor pressure of the contents builds up inside the closed vessel. This produces hydrothermal or solvothermal conditions up to a maximum of 60 bar and 240 ℃. The recommended heating and cooling speed is 5 ℃/min or less, which limits thermal stress on the liner and the body.
The steel body carries the pressure load. The liner separates the sample from the steel and gives resistance to acid. Because there is no stirrer, the reactor has no moving parts and no shaft seal. Only a small amount of solvent is needed for each run.
Main characteristics
- Volume: 30 ml to 1000 ml
- Max pressure: 60 bar
- Max temperature: up to 240 ℃
- Heating and cooling speed: 5 ℃/min or less
- Body material: SS304 or SS316
- Liner: PTFE or PPL, acid resistant; the temperature limit may be lower for a given liner material and is confirmed per order
- Agitation: none (non stirred)
Typical applications
- Catalysis experiments and catalyst synthesis
- Crystal growth
- Polymer and polymerization experiments
Specify for your project
- Vessel volume between 30 ml and 1000 ml
- Operating temperature up to 240 ℃ and pressure up to 60 bar
- Body material: SS304 or SS316
- Liner material: PTFE or PPL
- Any custom dimensions or closures
This description defines the product family. Guaranteed performance, included hardware, exclusions, interfaces and acceptance criteria are stated only in the project-specific technical proposal and approved datasheet.
Product features
- Laboratory autoclaves with 30ml to 1000ml volume.
- Max pressure: 60bar; Max temperature up to 240 ℃
- Tempe heating and cooling speed: ≤ 5℃/ min
- PTFE lined and PPL lined are available, resistance to acid. The temperature limit for each liner material is confirmed per order.
- High safety, easy operation, use little solvent, nice appearance.
- Available material:SS304, SS316
- Customized according to customers requirements.
Product details

Operating process














