Esterification Reactor & Polycondensation Reactor
Send a request
Esterification Reactor & Polycondensation Reactor
The LEERPR is a magnetically stirred pressure reactor that runs a two-stage polymer synthesis in one vessel: esterification first, then polycondensation. During esterification, water and other small molecules leave through a distillation column, packing tower and condenser. For polycondensation, the esterification valve is closed, the polycondensation valve is opened and the temperature is raised. The stirrer brings the low molecular weight reactants together while water, alcohol, ammonia or halides are collected in the condenser receiving tank. Users work in organic synthesis and chemical fiber development. Working volumes run from 100 ml to 50 liters.
Design
The vessel is SS-304 or SS-316 as standard, with other alloys on request. The inner surface is mirror polished with no dead ends. Standard working pressure is 100 bar, with a maximum of 350 bar; maximum working temperature is 350 °C. Heating is electric and cooling is by internal cooling coils. A high torque magnetic coupling drives the internal stirrer, so the shaft has no packed gland. Charging is from the top; discharge is from the bottom or upward by pressure.
The lid carries a gas port with needle valve, a liquid and sampling port with dip tube and needle valve, a pressure gauge with rupture disc, and the inlet and outlet of the cooling coil. A solid plug port and a temperature port are optional.
Control system
- PID temperature control, accuracy ±1 °C
- Digital display of inside temperature and inside pressure
- Agitator speed display and adjustment
- Heating power adjustment
Options
- Constant pressure feeding tank
- Vertical and horizontal condenser
- Reflux pipeline and external receiving pipeline
- Receiver and collection pot
- Buffer tank and vacuum pump
Specify for your project
- Working volume, 0.1 to 50 L
- Working pressure: standard 100 bar or up to 350 bar
- Maximum temperature, up to 350 °C
- Wetted material: SS-304, SS-316 or another alloy
- Condenser, receiver and vacuum arrangement for by-product removal
- Power supply
Models: LEERPR-0.1, LEERPR-5, LEERPR-10 and LEERPR-25, by volume range.
Model Volume, L Motor power Heating power Stirring speed LEERPR-0.1 0.1 to 5 40 to 600 W 0.8 to 4 kW 0 to 1500 rpm LEERPR-5 5 to 10 400 to 600 W 3 to 4 kW 0 to 1500 rpm LEERPR-10 10 to 25 600 to 750 W 4 to 9 kW 0 to 750 rpm LEERPR-25 25 to 50 1100 W 9 to 15 kW 0 to 450 rpm This description defines the product family. Guaranteed performance, included hardware, exclusions, interfaces and acceptance criteria are stated only in the project-specific technical proposal and approved datasheet.
Salient Features
- 100ml to 50 liters volume;
- Pressure up to 350bar;
- Temperature up to 350℃;
- Standard materials:SS-304, SS-316, or other alloys.
- Heating method: Standard electric heating;
- Cooling method:internal cooling coils
Magnetic Couplings Driver
- All stirred reactors are equipped with a magnetic drive to provide a trouble-free linkage to an internal stirrer, thereby avoiding the leakage problems which sometimes arise with a packed gland stirrer drive.
- High torque magnetic couplings;
Optional
- Constant pressure feeding tank;
- Vertical and horizontal condenser;
- Reflux pipeline and external receving pipeline;
- Receiver and collection pot;
- Buffer tank & vaccum pump.
Control System
- PID automatic temperature control, temperature accuracy +/- 1℃;
- Digital display of inside temperature;
- Digital display of the inside pressure;
- Agitator speed digital display and adjustment;
- Heating power adjustment.
Specification
Type LEERPR-0.1~5 LEERPR-5~10 LEERPR-10~25 LEERPR-25~50 Volume 0.1~5 5~10 10~25 25~50 Working pressure Standard 100 bar, maximum up to 350 bar Motor power 40~600W 400~600W 600~750W 1100W Working temperature Maximum up to 350°C Heating power 0.8~4 kW 3~4 kW 4~9 kW 9~15 kW Stirring speed 0-1500 rpm 0-1500 rpm 0-750 rpm 0-450 rpm Heating type Standard Electric heating Charging type Up discharging by pressure, discharging from bottom Opening port of kettle lid Gas Port with needle valve; Liquid / sampling port with dip tube & needle valve; Solid plug port optional Temperature measure Port; Pressure gauge with rupture disc; Inlet and outlet port of cooling coil with tap. Note:
- Customer is advised to select best suited options for most optimized price & delivery.
- Customization of volume, material, pressure, temperature etc. may be possible on request.
- Different power supply options may be possible on request.









