Custom High Pressure Reactors
Send a request
Custom High Pressure Reactors
LECHPR custom high pressure reactors are pressure vessels built to the customer's own specification, from 5 mL up to 50 litres and larger. Size, pressure rating, temperature range, chemical resistance, sampling, charging, heating and cooling are all set by the process the lab wants to run. The family suits users whose work does not fit a catalogue reactor.
Design
Pressure is set to the requirement, with designs at 500 bar and above. Temperature range is also set to the requirement. Several heating and cooling methods are available:
- Heating or cooling coil
- Dedicated electrical heater for temperatures of 800 °C and above
- Jacketed reactor system
- Separate cooling
Mixing is by overhead stirring or by a magnetic stirrer bar (flea). Liners in PTFE or glass can be fitted. Sampling and charging ports, a burst disc with its pipework, hoses for gas lines, and pipework to connect to an existing gas source are part of the build.
Materials of construction
Material choice is a critical part of each design. Most standard units use stainless steels such as super duplex, 316 and 321. For special duties the vessels are built from exotic metals and other grades:
- Hastelloy, Inconel, Incoloy and Monel
- Ferralium and Nimonic alloys
- Nickel, Titanium and Zirconium
- Alloy steels
Options
- Sampling and charging systems
- PTFE or glass liners
- Overhead or magnetic flea stirring
- Burst disc and associated pipework
- Gas line hoses and integration with an existing gas supply
Specify for your project
- Vessel volume, from 5 mL to 50 litres plus
- Design and working pressure, including ratings of 500 bar and above
- Temperature range and heating method: coil, electrical heater up to 800 °C+, or jacket
- Material of construction for the process chemistry
- Stirring type, liner, sampling and charging needs
- Gas supply connections and safety relief
This description defines the product family. Guaranteed performance, included hardware, exclusions, interfaces and acceptance criteria are stated only in the project-specific technical proposal and approved datasheet.
Technical specifications
- Exotic metals eg. Hastelloy or inconel
- Pressure to your requirement; 500 bar +
- Temperature range to your requirement
- Temperature control via heating or cooling coil
- Temperature control via dedicated electrical heater; 800 °C+
- Temperature control via Jacketed reactor system
- Sampling & charging
- Overhead stirring
- Stirring via magnetic flea
- Liners: PTFE, glass
- Cooling
- Hosing for connection to gas lines
- Overhead stirring
- Burst disc & associated pipework
- Pipework to integrate with your existing gas source



















