Crane Lifting High Pressure Reactor
Send a request
Crane Lifting High Pressure Reactor
The LECLHPR crane lifting high pressure reactor is a pilot-scale stirred autoclave for scale-up and small-scale production. At this size the detachable head and the vessel are too heavy to lift by hand. A chain pulley support raises and lowers the head with little effort, and electric or hydraulic lifting can replace it. Typical processes are hydrogenation, gas liquid reactions, polymerization, synthesis, catalytic and petrochemical work.
Design
- Frame: floor stand or movable cart.
- Head: flat cover or elliptical flange type, lifted by chain pulley, electric or hydraulic hoist.
- Drive: low to high torque magnetic coupling, static seal with no rotating shaft gland.
- Material: clad SS304, SS316 or other alloys. Titanium, Nickel, Hastelloy B/C, Monel, Zirconium, Inconel and Tantalum are available.
- Temperature: design temperature 0 to 350°C, customized per project.
- Heating: electric as standard. Thermal oil, steam and far infrared heating are available.
- Control panel: PID temperature display and control with ±1 °C accuracy, stirring speed, operation time, heating voltage and current display. Temperature, pressure, motor speed and operating time are monitored.
Standard models
Model Nominal capacity Stirring speed Motor power LECLHPR-50 50 L 0 to 500 rpm 1.5 kW LECLHPR-100 100 L 0 to 500 rpm 2.2 kW LECLHPR-200 200 L 0 to 450 rpm 2.2 kW LECLHPR-300 300 L 0 to 450 rpm 4 kW LECLHPR-500 500 L 0 to 450 rpm 5.5 kW Standard parameters are for reference. Each process gets its own selection, and more functions are not always better.
What is included
Pressure gauge, thermocouple, internal stirring system, liquid inlet and gas inlet with needle valve, dip tube, safety rupture disc and cooling coil.
Options
- Impeller: propeller paddle, anchor, spiral, turbine or gas inducing type
- Internal spiral cooling coil
- Bottom discharge or up discharge by pressure
- Solid plug port, constant feeding tank, safety valve, drain valve
- External condenser, reflux pipeline and receiver
Specify for your project
- Nominal capacity, 50 to 500 L
- Design pressure and vacuum requirement
- Design temperature, up to 350 ℃
- Material and cladding for the process media
- Impeller type, heating method and lifting type
This description defines the product family. Guaranteed performance, included hardware, exclusions, interfaces and acceptance criteria are stated only in the project-specific technical proposal and approved datasheet.
Product features
- Floor stands or moveable cart type.
- Capacity volume: 50 liters to 500 liters.
- Design pressure: -0.1 to 250 bar, customized; Max temperature up to 350 ℃
- Low to high torque magnetic couplings: static seal with no leakage.
- Chain pulley lifting device for reactor head rising and lowering (Electric lifting and hydraulic lifting available)
- Available material:SS304, SS316, Titanium, Nickel, Hastelloy B/C, Monel, Zirconium, Inconel, Tantalum.
- Monitor and control: Temperature, pressure, motor speed, operating time, etc.
- Customized according to customers requirement.




Standard specifications
Model No. LECLHPR-50 LECLHPR-100 LECLHPR-200 LECLHPR-300 LECLHPR-500 Nominal Capacity 50 L 100 L 200 L 300 L 500 L Design Pressure -0.1-250 bar customized Material Clad SS304, SS316 or other alloys Design Temperature 0~350°C customized Stirring Speed 0-500 rpm 0-500 rpm 0-450 rpm 0-450 rpm 0-450 rpm Motor Power 1.5 kW 2.2 kW 2.2 kW 4 kW 5.5 kW Heating Method Standard electric heating (Thermal oil, steam, far infrared heating available) Head type Flat cover or elliptical flange type Impeller type (Optional) Propeller paddle, anchor, spiral, turbine, gas inducing type, etc Cooling type (Optional) Internal spiral cooling cools Discharging type (Optional) Discharging from bottom or up discharge by pressure. Control panel PID temperature display and control, accuracy±1 °C; Stirring speed display; Operation time display; Heating voltage and current display. Standard Pressure Gage: Thermocouple; Internal Stirring System Liquid inlet and gas inlet with needle valve Dip Tube; Safety Rupture Disc; Cooling Coil Optional Solid plug port, constant feeding tank, safety valve, external condenser, Reflux pipeline, drain valve, receiver, etc. Note:
- The above standard parameters are for reference only. Different processe have their own reasonable selection, not the more complete the function, the better.
Product details
Structure drawings

Internal components

















