Sample Collection Vessels for Stirred Reactors
Send a request
Sample Collection Vessels for Stirred Reactors
LESCVSR Sample Collection Vessels withdraw liquid or vapor samples from reactor systems at elevated temperature and pressure. They can be fitted to most systems. The 10 mL vessel has a quick-close arrangement with an O-ring seal and is rated for operating pressures to 3000 psi (200 bar).
A typical installation includes a cooling sleeve, an isolation valve and a vent valve. A drain valve can be added.
The isolation valve sits on the vessel head and closes the collection vessel after sample transfer. The vent valve is fitted in a tee to release pressure left in the line between the sampling valve and the collection vessel.
An optional drain valve fits at the vessel bottom. To recover a sample, either open the vessel and pour out the contents or discharge them through the fitted drain valve.
This description defines the product family. Guaranteed performance, included hardware, exclusions, interfaces and acceptance criteria are stated only in the project-specific technical proposal and approved datasheet.
T316 Stainless Steel is the standard construction material. Other available alloys can be used when required for the application. For high pressure sampling, a 35mL or 75mL collection vessel without a cooling sleeve can be supplied on request for pressures up to 5000 psi.
Collection assembly Equipment and connection details Sample collection vessel 10 mL collection vessel with a cooling sleeve, isolation valve and vent valve, for connection to 1/8” NPT valves Sample collection vessel 10 mL collection vessel with a cooling sleeve, isolation valve and vent valve, for connection to 1/4” NPT valves Sample collection vessel 10 mL collection vessel with a cooling sleeve, isolation valve and vent valve, for connection to 3/8” NPT valves Drain option Optional valve for draining the collection vessel









