Pressure Hose for Stirred/Non-Stirred Pressure Vessels
Send a request
Pressure Hose for Stirred/Non-Stirred Pressure Vessels
Three pressure hose assembly types are offered for high pressure gas connections to stirred and non-stirred reactors. The standard assembly is 6 foot long. One end has a male “A” socket connector; the other has a 1/8 inch NPT(M) nipple fitted with a 1/4 inch NPT(M) bushing.
The “A” end connects to couplings on the inlet valves of stirred reactors or to a side port on the gage block of a non-stirred vessel. At the supply end, a choice of 1/8 inch NPT or ¼ inch NPT permits connection to most gas tank valves, pressure regulators and other gas sources.
This description defines the product family. Guaranteed performance, included hardware, exclusions, interfaces and acceptance criteria are stated only in the project-specific technical proposal and approved datasheet.
Nylon pressure hose
The nylon hose assembly carries a rating of 2500 psi. Its flexibility makes it convenient to connect dry, non-corrosive gases, including nitrogen, hydrogen and oxygen. Keep the nylon clear of hot surfaces on both the vessel and its heater. Whether a hose is included with a complete apparatus is stated in the project-specific proposal.
PTFE-lined braided hose
A stainless steel braid surrounds the PTFE lining of this hose, which is rated for 2500 psi. The assembly provides moderate flexibility. It is recommended for corrosive gas and liquid service and where extra resistance to abrasion is needed. It is unsuitable for transferring liquids or gases at high temperature.
Stainless steel gas tubing
The tubing assembly comprises a 6 foot length of stainless steel tube with a 1/8 inch OD and a 7500 psi rating. Its small diameter allows bending, although it has less flexibility than the hose alternatives. Recommended duties include corrosive gases, transfer at high temperature and other high pressure work. Versions using other corrosion resistant materials can be supplied for specific duties. Larger tube sizes can also be used, but those assemblies are rigid rather than flexible.
For particular connection requirements, hose assemblies can be supplied with different lengths or alternative end fittings.
Reinforced nylon hose 6-ft pressure hose assembly in reinforced Nylon Nylon hose with check valve 6-ft reinforced Nylon pressure hose assembly fitted with a non-return valve Long nylon hose 10-ft pressure hose assembly in reinforced Nylon Braided hose 6-ft pressure hose assembly with PTFE lining and braided stainless steel exterior Braided hose with check valve 6-ft PTFE-lined, braided stainless steel pressure hose assembly fitted with a non-return valve Stainless gas tube 6-ft gas tube assembly, 1/8-in OD, T316SS













