Pellet Press
Send a request
Pellet Press
The LEPP Pellet Press compresses powdered samples into pellets or tablets for oxygen bomb calorimetry. Many powders burn satisfactorily without compaction. Others, including benzoic acid, require pelletizing for safe and complete combustion.
Compacting a sample provides three benefits: it limits the burning rate to a safe level, holds loose powder in place to prevent possible ejection from the combustion cup, and makes the sample easier to handle while weighing and transferring it to the bomb.
The resulting pellets are cylindrical with flat ends. Six punch and die sizes are available, covering diameters from 3.0 mm to 1/2 inch. Every set fits the same basic press and can be interchanged. The 1/2 inch diameter is the size most frequently used in bomb calorimetry.
This description defines the product family. Guaranteed performance, included hardware, exclusions, interfaces and acceptance criteria are stated only in the project-specific technical proposal and approved datasheet.
Pellet press configurations Press only Pellet press supplied without a punch and die set Inch tooling Pellet press supplied with a punch and die set of 0.50 inch Inch tooling Pellet press supplied with a punch and die set of 0.375 inch Inch tooling Pellet press supplied with a punch and die set of 0.25 inch Inch tooling Pellet press supplied with a punch and die set of 0.125 inch Metric tooling Pellet press supplied with a punch and die set of 3.0 mm Metric tooling Pellet press supplied with a punch and die set of 4.5 mm Pellet press configurations Press only Pellet press supplied without a punch and die set Inch tooling Pellet press supplied with a punch and die set of 0.50 inch Inch tooling Pellet press supplied with a punch and die set of 0.375 inch Inch tooling Pellet press supplied with a punch and die set of 0.25 inch Inch tooling Pellet press supplied with a punch and die set of 0.125 inch Metric tooling Pellet press supplied with a punch and die set of 3.0 mm Metric tooling Pellet press supplied with a punch and die set of 4.5 mm









