Gages for Stirred Reactors
Send a request
Gages for Stirred Reactors
Pressure vessel gages are available with 3-1/2″ or 4-1/2″ dials in the pressure ranges listed in the associated table. Standard construction uses stainless steel Bourdon tubes and 1/4″ NPT male connections. Alloy 400 gages can be supplied to special order.
Accuracy is 1 percent of full scale for the 4-1/2″ dial and 1 percent for the 3-1/2″ dial. Standard instruments have dual scales graduated in pounds per square inch (psi) and bar. Scales in Pascal units are available to special order. Compound gages indicate vacuum to 30 inches of Mercury and positive pressure to 300 psi (20 bar).
For a special gage, specify the dial diameter, required pressure range and scale units.
Select a full-scale range equal to 150 percent of the vessel's maximum operating pressure. This keeps readings in the more accurate operating region and avoids repeated loading to full scale, which can alter calibration.
This description defines the product family. Guaranteed performance, included hardware, exclusions, interfaces and acceptance criteria are stated only in the project-specific technical proposal and approved datasheet.
Pressure range, psi Equivalent range, bar Gage with 4-1/2″ diameter Gage with 3-1/2″ diameter Back-mounted gage with 3-1/2″ diameter 0-100 0-7 Pressure gage Pressure gage Back-mounted pressure gage 0-200 0-14 Pressure gage Pressure gage Back-mounted pressure gage 0-600 0-40 Pressure gage Pressure gage Back-mounted pressure gage 0-1000 0-69 Pressure gage Pressure gage Back-mounted pressure gage 0-2000 0-138 Pressure gage Pressure gage Back-mounted pressure gage 0-3000 0-207 Pressure gage Pressure gage Back-mounted pressure gage 0-5000 0-345 Pressure gage Pressure gage Back-mounted pressure gage 0-7500 0-517 Pressure gage NA Back-mounted pressure gage 0-10000 0-690 Pressure gage Pressure gage -













