Catalyst Baskets for Stirred Reactors
Send a request
Catalyst Baskets for Stirred Reactors
LECBSR Catalyst Baskets retain supported catalyst inside stirred reactors, protecting it from damage or alteration caused by the impeller. They fit reactor volumes from 300 to 2000 mL and are available in two interchangeable styles.
Basket installation needs dedicated head designs, internal cooling coils, thermowells and dip tubes to leave the necessary clear space inside the vessel.
This description defines the product family. Guaranteed performance, included hardware, exclusions, interfaces and acceptance criteria are stated only in the project-specific technical proposal and approved datasheet.
Basket assemblies for catalyst testing Reactor volume, mL Basket arrangement Catalyst capacity (cm3) 300* Static 40 450* Static 40 500 Static 40 600* Static 40 1000 Static 150 1000 Dynamic 150 1200* Static 40 1800* Static 150 1800* Dynamic 150 2000* Static 150 2000* Dynamic 150 *A special inlet tube and thermowell may be needed. Stationary basket arrangement
In the static arrangement, the catalyst stays in a stationary mesh basket. Impellers on the stirrer shaft and baffles outside the basket move the reactants across the catalyst surface. A gas entrainment impeller distributes both gas and liquid uniformly over the fixed catalyst bed in the annular basket. A rigid support at the bottom of the basket limits vibration during high speed stirring. The installed basket leaves the usual cooling coil, internal temperature measurement, liquid sampling and gas sampling functions available without interference.
Rotating basket arrangement
The dynamic arrangement places the catalyst in an annular mesh basket attached directly to the stirrer drive in place of the normal stirring shaft. As it rotates, the basket acts as the impeller that mixes the reactants. Fixed baffles and coaxial impellers promote circulation across the contained catalyst. Dynamic baskets are available for reactor capacities of 1000, 1800 and 2000 mL. A motor rated at least 1/4 hp is required to supply the stirring torque and speed needed for correct operation. In vessels of 1 liter or greater, a dynamic basket can be exchanged for a static basket.













