High Pressure High Temperature Spray Test Chamber
Send a request
High Pressure High Temperature Spray Test Chamber
The LEIPX9K-1000L is a test chamber for the high pressure, high temperature water jet test (IPX9K), used on vehicle parts, motorcycle components, lamps, electrical cabinets and other enclosures that must survive close-range hot pressure washing. A 1000 x 1000 x 1000 mm stainless working space holds the specimen on a turntable while four fixed nozzles spray it from set angles. Test standards listed are ISO 20653-2013, VW80000 and GB/T 4208-2017.
How it works
A high temperature, high pressure pump draws from the built-in water tank and feeds 4 circular nozzles placed at 0, 30, 60 and 90 degrees. Spray flow is 14 to 16 L/min at 8000 to 10000 kPa (8 to 10 MPa), with water at 80 ±5 °C and an impact force of 0.9 to 1.2 N. Nozzle distance adjusts from 100 to 200 mm. Smaller specimens turn on a 400 mm turntable at 1 to 10 r/min, carrying up to 50 kg; the standard test is 30 seconds at each of the 4 angles, 120 s in total. Larger specimens are mounted upright and sprayed by hand for at least 3 minutes. Water recirculates through the tank; a float valve controls filling and a low level alarm protects the pump.
Design
- Inner chamber SUS304 stainless steel plate, welded
- Outer shell cold rolled steel plate, 1.5 mm, electrostatic powder coat
- Multi-layer vacuum glass window with LED lighting
- 7 inch PID programmable controller; spray flow, pressure, temperature, turntable speed and angle programmable
- Test time 0 to 999 min
- Supply 380 V, 50/60 Hz, 15.0 kW; specimen supply AC 110 V or 220 V
- Protection: earth leakage, low water, short circuit, phase, overload
Options
- USB, RS-232 or RS-485 interface
- Printer
Specify for your project
- Test standard and specimen size, up to the 1000 mm cube working space
- Specimen mass, up to 50 kg on the turntable
- Whether the specimen is powered during the test
- Water supply, drainage and power at site
- Data interface
LEIPX9K is the model family; LEIPX9K-1000L is the 1000 L chamber.
This description defines the product family. Guaranteed performance, included hardware, exclusions, interfaces and acceptance criteria are stated only in the project-specific technical proposal and approved datasheet.
Product Details:
- LEIPX9K is Powerful high temperature water jets,Protected against close-range high pressure, high temperature spray downs.
- Smaller specimens rotate slowly on a turntable, from 4 specific angles. Larger specimens are mounted upright, no turntable required, and are tested freehand for at least 3 minutes at distance of 0.15–0.2 m.
- There are specific requirements for the nozzle used for the testing.
- This test is identified as IPX9K in IEC 60529.
- Test duration: 30 seconds in each of 4 angles (2 minutes total)
- Water volume: 14–16 litres per minute
- Pressure: 8–10 MPa (80–100 bar) at distance of 0.10–0.15 m
- Water temperature: 80 °C
- Meet ISO20653-2013,VW80000,GBT4208-2017 Standard
- Customization is available & welcomed.
Model No LEIPX9K-1000L Applications Applications:to test the physical and other related properties of the products in the environment of simulated rain, such as electronic and electrical products, lamps, electrical cabinets, electrical components, automobiles, motorcycles and their parts and components. After the test, through the test to determine whether the performance of products meet the requirements in order to facilitate product design, improvement, testing and factory inspection. Standards ISO20653-2013,VW80000,GBT4208-2017 Standard Features 1. Applied for IPX9K Grade Testing
2. Outer wall material:Cold-Rolled steel plate,thickness 1.5mm,with static color spay.Excellent look and Durable quality.
3. SUS#304 Stainless steel plate with seamless welding,laser.,etc. Make sure it will not get rusty.
4. Self-installed with Water Tank,Recycle Water.Water level float ball valve control water filling and alarm when the water is lacking,to prevent water pump get damaged because water lacking.
5. Multi-layer vacuum glass observation window on door with LED light inside,easy to observe the inner chamber.
6. 90°Angle with 4 pieces circular sprayer, Corresponding with standards.
7. Spaying flow,pressure and temperature are programmable in Controller.
8. Rotating table driving:the speed and angle are programmable in Controller.The speed is CVT.
9. Water pump with high temperature and pressure resistance,the performance is stable and durable.
10. Time range:0-999Min(adjustable)
11. 7 Inch PID programmable controller.
12. Optional:USB,RS-232,RS-485,Printer.Technical Parameters Structure Parameter Inner chamber size(mm)W*H*D W1000*H1000*D1000 mm Exterior chamber size(mm)W*H*D W1400*H1850 mm Sprayer 4pcs Sprayer angel 0°、30°、60°、90° Sprayer distance 100-200mm Adjustable Rotating table Diameter Diameter:400mm Lifting rotating table Fixed Functional Parameter Spray flow 14~16L/min Sprayer temperature Room Temperature :25℃;Water temperature:80±5℃ Water pressure 8000~10000 Kpa Spraying Impact Force 0.9~1.2N Load-Bearing of Rotating table 50kg Rotating speed 1~10 r/min Testing time 120S Electric Parameter Power Supply of Test chamber 380V/50Hz/60Hz Power Supply of Testing specimen AC 1Ψ 110V;AC 1Ψ 220V,60/50Hz Equipment power 15.0KW Safety protection device Earth Leakage Protection,Water lacking Protection,Short-circuit Protection,Phase protection,Over-loading Protection,Leakage protection. Configuration Description Specification QTY Chamber Inner:SUS#304 Stainless steel plate,Outer:Cold-Rolled steel plate,thickness 1.5mm,with static color spay.Excellent look and Durable quality. 1set Water Tank SUS#304 Stainless steel plate 1set Rotating Table SUS#304 Stainless steel 1set Sprayer SUS#304 Stainless steel 4sets Water pump with high temperature and pressure resistance 1set Solenoid with high temperature and pressure resistance 4sets Controller 7Inch 1set PLC Controller 1set Temperature Module 1set PLC Extended module 1set Force calibration system 1set AC contactor 1set Thermal-overload relay 1set Intermediate Relay 5set Phase relay 1set Flow Sensor 1set Pressure sensor 1set Transducer 1set Leakage Switch 1set Power Switch 1set Pressure Meter Y-60BFZ 1set Float ball ND15 1set Motor 57# 1set Reducer 1set Button Switch 2set Brochures 1. User manual 2. Certificate of Quality and Quantity 3. Warranty certificate.









