Integral Bonnet Female Thread Needle Valve
Send a request
BN Series
Integral Bonnet Female Thread Needle Valve
The le140423945 is a manual integral bonnet needle valve with female threaded ports from 1/8" to 3/4", rated to 3000 psig. It is a BN series shut-off valve for water, oil, gas and alkaline or acidic liquids on laboratory benches, gauge and instrument lines, sampling points and small utility manifolds where threaded pipe is used.
Design
The bonnet is integral with the body, so there is no separate screwed bonnet. The stem is threaded and ends in a needle tip that closes against the seat by hand. The fine thread gives gradual opening for metering as well as shut-off. Female threaded ends accept threaded pipe nipples, adapters or male connectors directly.
- Rated pressure: 3000 psig
- Media temperature: -65 to 450 °F (-54 to 230 °C)
- Port size: 1/8" to 3/4" female thread
- Operation: manual, shut-off duty
- Media: water, oil, gas, alkaline or acidic liquids
Materials
The valve is made in SS316, SS304, SS316Ti, F51, F53, Inconel, Monel and Hastelloy. SS316 suits most general service. F51 and F53 duplex forgings resist chloride water. Inconel, Monel and Hastelloy are chosen for acids, halides and other media that attack stainless steel.
Installation notes
Install the valve with the flow direction marked on the body, and support the line so pipe loads do not bear on the threaded ports. Use thread sealant compatible with the media and temperature.
Specify for your project
- Port size and thread standard, 1/8" to 3/4"
- Body material
- Media and temperature within -54 to 230 °C
- Operating pressure up to 3000 psig
- Quantity
This description defines the product family. Guaranteed performance, included hardware, exclusions, interfaces and acceptance criteria are stated only in the project-specific technical proposal and approved datasheet.
Pressure 3000Psig Product Details
- Model Number: BN Series
- Application:General
- Material: SS316,SS304,SS316Ti,F51,F53,Inconel,Monel,Hastelloy,etc.
- Temperature of Media: -65 to 450℉(-54 to 230℃)
- Pressure: 3000Psig
- Power:Manual
- Media:Water,Oil,Gas and Alkaline or Acidic Liquid
- Port Size:1/8"-3/4”
- Structure:Shut off
- Standard or Nonstandard:Standard
- Product name: Integral Bonnet Needle Valve
- Connection: Female Thread (thread standard on request)
- MOQ:10pcs
- Certification: on request
Product Details
- Model Number: BN Series
- Application:General
- Material: SS316,SS304,SS316Ti,F51,F53,Inconel,Monel,Hastelloy,etc.
- Temperature of Media: -65 to 450℉(-54 to 230℃)
- Pressure: 3000Psig
- Power:Manual
- Media:Water,Oil,Gas and Alkaline or Acidic Liquid
- Port Size:1/8"-3/4”
- Structure:Shut off
- Standard or Nonstandard:Standard
- Product name: Integral Bonnet Needle Valve
- Connection: Female Thread (thread standard on request)
- MOQ:10pcs
- Sample:Yes
- Certification: on request
- Supply Ability:2000 Piece per Month
Lead Time:
Quantity(Pieces) 1 - 100 >100 Est. Time(days) 20 To be negotiated











