✓ In-house manufacturing — Hastelloy C276 & titanium✓ Custom engineering & prototypes✓ API / ASTM · CSA · CRN · CE✓ Serving US, Canada, EU, Middle East, Central Asia, Africa & LatAm

Micro Batch Reactor System MBRS-2500 Series

  • The LEMBRS-2500 Micro Batch Reactor System combines very small stirred reactors for high pressure experiments with limited sample volumes. It is available in several configurations with 5 mL or 10 mL vessels, independent gas filling, PID temperature control and two closure styles.

    The small-volume arrangement reduces the installation footprint and uses a stand-alone control and data logging system.

    Equipment and controls

    • Three reactors, each of 5 mL or 10 mL capacity. Material choices include stainless steel, high-nickel alloys, titanium, zirconium and other exotic materials.
    • A 10” x 12” (25 cm x 30.5 cm) footprint, with a remotely installed modular controller for temperature, stirring and pressure display.
    • A standard rating of 2900 psi (200 bar) @ 300 °C in T316 Stainless Steel.
    • A choice of established seal arrangements: a captive flat PTFE gasket with a screw cap and compression bolts, or a self-sealing O-ring and a screw cap closed without tools.
    • Standard head fittings comprising a safety rupture disc, pressure transducer, inlet/vent valve and internal thermocouple.
    • A 3-valve inlet manifold that controls gas addition.
    • A Micro Batch System Controller providing PID control of the shared aluminum block heater, individual reactor temperature monitoring (HTMS) and individual reactor pressure monitoring (PDMS).

    This description defines the product family. Guaranteed performance, included hardware, exclusions, interfaces and acceptance criteria are stated only in the project-specific technical proposal and approved datasheet.

    • Micro Batch Reactor System MBRS-2500 Series
    • Micro Batch Reactor System MBRS-2500 Series
  • Equipment configurationMultiple reaction vessel system
    Vessel capacities, mL510
    Reaction vessel count3
    Pressure limit2900 psi (200 bar)
    Internal temperature limits
    EP O-ring seal150 °C
    FKM O-ring seal225 °C
    FFKM O-ring seal275 °C
    Carbon-Filled PTFE Flat Gasket seal300 °C
    Vessel closure arrangement
    O-ring versionScrew Cap
    Flat gasket versionScrew Cap (6 Compression Bolts)
    Construction materialT316SS
    Control equipmentMultiple vessel controller
    Analog input channels4 Temperature (3 vessels, 1 heater block)
    3 Pressure
    1 Motor Speed
    Analog output channels1 Stirrer Speed
    Digital output channels1 PID Temperature Control
    Temperature sensing arrangementAn individual thermowell in each vessel
    Heater arrangementAluminum Block
    Heater power, Watts450W
    Thermocouple mounted in blockIncluded
    Stirrer motor operationManual or Computer Controlled
    Stirring elementMagnetic stirrer bars encapsulated in PTFE or borosilicate glass
    Single phase electrical supply
    Supply voltage, Volts, AC115 / 230
    Maximum current load, amps4.6/ 2.3
    Vessel size and weight
    Internal diameter, inches0.620.80
    Internal depth, inches1.061.22
    Vessel weight, pounds3 (with Head-Mounted Valves)
    Equipment dimensionsWidth, in.Depth, in.Height, in.Weight, lb.
    Main assembly810.52241
    Multiple vessel controller13.5111014
    Replacement parts packageSpare parts kit
Coretest