Send a request
LEHI
Hydraulic intensifier LEHI series
The LEHI series are utilized to pressurize fluid samples. They are dual chamber cylinders comprising a low pressure (LP) chamber and a high pressure (HP) chamber. The chambers are separated by a dual piston rod. The LP chamber has a greater cross sectional area than that of the HP, therefore a pressurized fluid injection in the LP chamber will result in the multiplication of the fluid pressure inside the HP chamber by a factor equal to the ratio of the two piston cross sectional areas. Consequently, pressures up to 150Kpsi can be achieved by using a commercially available lower pressure (15 Kpsi) pump. The apparatus can be manufactured from Stainless Steel or hastelloy.
Model Ratio HP end vol.
(mlHP end pressure
(psiHP end ID
(mm)HP end stroke
(mm)LP end pressure
(psi)LP end ID
(mm)LEHI2 2:1 50 20,000 25.46 98.24 10,000 36 LEHI4 4:1 25 40,000 18.00 98.24 10,000 36 LEHI6 6:1 20 60,000 14.70 117.89 10,000 36 LEHI8 8:1 15 80,000 12.73 117.89 10,000 36 LEHI10 10:1 10 10,000 11.38 98.24 10,000 36 LEHI15 15:1 5 150,000 9.30 73.68 10,000 36 Additional features:
- Temperature: ambient
- Thread connection: ¼” FNPT (Low pressure side ) and ¼” FHP (High pressure side)
- Wetted parts: Stainless steel or hastelloy
- Weight: Approx. 22 Kg
- Length: 600 mm
- Diameter: 90 mm to 120 mm depending on the model.
| Model | LEHI |
| Brand | LabEquipx |
