Conveyor Oven
Send a request
Conveyor Oven
The LECO is an electrically heated tunnel oven with a conveyor that carries product through the heated chamber at a set speed, so baking time is fixed by conveyor speed and oven length. Bakery producers use it for continuous production of buns, bread, cakes, moon-cakes and pastries. It is built in two versions by temperature range: normal temperature up to 250 °C (482 °F) and high temperature up to 500 °C.
Heating and insulation
Heat comes from tube elements with double heating spirals, made for each oven, on average 12 elements per meter of oven. Elements sit above the oven chamber and below the belt and are reached from the side. Insulating material limits heat loss, so the stainless steel exterior stays relatively cool.
Turbo zones and steam
For some products, especially baking in tins, turbo zones add fan air circulation to radiant heat. In a mesh belt oven the hot air is forced through the belt; in a solid steel belt oven it is blown horizontally along the zone. Fan speed is adjustable. Turbo zones shorten baking time and allow lower temperatures. Ovens with a steam system have stainless steel steam spread boxes in the first section, with indicator valves to set steam flow.
Control and drive
A PLC touchscreen handles temperature regulation and oven control, with recipe handling, alarms, log function and Internet connectivity as standard. A frequency converter sets the drive motor speed. Long ovens and ovens for heavy products have a double drive, each with its own motor.
Conveyor options
- Belt conveyor: for relatively light loads; wire mesh belts, or non-marring Teflon coated fiberglass reinforced belts for temperatures up to 500 °C
- Chain and slat conveyor: for medium loads or uneven product surfaces; two or three chain strands, with slats for a flat surface or fixtures
- Roller conveyor (roller hearth): highest load capacity; rollers driven by a common chain from a gear motor, with zero-pressure accumulation inside the oven
Oven length, belt width and heating power are not fixed for the series and are provided on request.
Specify for your project
- Product type and throughput
- Temperature version: up to 250 °C or up to 500 °C
- Conveyor type and belt material
- Turbo zones and steam system
- Single or double drive
This description defines the product family. Guaranteed performance, included hardware, exclusions, interfaces and acceptance criteria are stated only in the project-specific technical proposal and approved datasheet.
Energy saving technology
Tunnel ovens are built with super insulating material that ensures that very limited heat escapes from the ovens resulting in the exterior being relatively cool.The exterior is made of stainless steel and the design aims at low heat loss and energy efficiency.
Heating
The tunnel ovens are heated by the tube elements with double heating spirals.They are specially made for each oven to maximize the heat control and reliability of the elements.On average, 12 elements per meter of oven are used.The elements,placed on the top of the oven chamber and below the belt,are easily accessed from the side.
Turbo Zone
From some products,especially when baking with tins,the use of air circulation from turbo fans in combination with radiant heat is suitable.In such cases the oven is equipped with turbo zones.In a mesh belt oven,the hot air is forced through the belt and in a solid steel belt oven the hot air is blown horizontally along the zone.Turbo zones allow for the baking time to be reduced and lower temperatures used.With the adjustable fan speed the optimal turbo effect can be reached.
Steam system
In ovens equipped with a steam system the first part of the oven contains steam spread boxes made out of the highest grade of stainless steel.Valves with indicators are used to adjust the proper flow of steam.
Oven Control System
The PLC touchscreen is designed to be easy to use and give the best possible overview and control.Apart from temperature regulation and oven control,the touchscreen also comes standard with recipe handling,alarms,log function and Internet connectivity.
Belt Driving System
A frequency converter controls the speed of the driver motor,and the robust belt driving system provides optimal reliability and exact baking time.Long ovens and ovens for heavy products are fitted with double drive system,each with its own motor.
Belt conveyor ovens
The lowest cost and most common type of conveyor oven,belt conveyor ovens are extremely versatile and best suited for relatively light loads.In addition to standard wire mesh belts,Teflon coated fiberglass reinforced belts are also available for temperatures up to 500℃(932ºF).These belts are non-marring and therefore well suited for handling coatings or finished products.
Chain & Slat conveyor ovens
These conveyor ovens are best suited for medium size loads or products with inconsistent conveying surfaces.Chain conveyors are available in two or three strand configurations.A plate "Slat" can be attached to two chain strands,which provides a flat surface for the products or a means to mount fixtures required to support the products through the oven.
Roller conveyor ovens
Also know as roller hearth ovens,theses ovens have the highest conveyor load capacity.A series of rollers,mounted in bearings with sprockets on one end are driven by a common drive chain(or series of chain loops) connected to a gear motor.This conveyor design is also suited for Zer-pressure zoned accumulation,allowing products to accumulate inside the oven,independent of the rate of discharge.








