Battery Crush Squeeze Test Chamber LEGBE

Standard Compliance

• UN38.3 These tests simulate mechanical abuse from an impact or crush that may result in an internal short circuit.
• MT/T 1051-2007 Lithium-ion batteries for cap lamp --Crush Test
• UL 1642 Lithium Batteries --Crush Test
• UL 2054 Lithium Batteries
• GB/T 2900.11-1988 Terminology of (secondary) cell or battery
• YD 1268- 2003 The safety specification and test method for lithium batteries and charger--crush test
• SJ/T 11169-1998 Standard for lithium batteries crush test
• GB/T 8897.4-2002Primary batteries: Safety of lithium batteries --crush test
• SJ/T 11170-1998 Standard for household and commercial batteries --crush test
• YDB 032-2009 Back-up Lithium-ion battery for telecommunications
• QB/T 2502-2000 General specification of lithium-ion battery --crush test

Specifications

1. Factory direct sale
2. Certificate:ISO
3. Can be customized
4. Good after-sale service
5. Warranty: 24 months

Features

1. The wire enclosed with metal fire-proof cover, which is available to prevent the flame during testing process.
2. Lighting system is designed to observe the internal testing process;
3. Nail Penetration/Crush Force controllable within range from 250N to 13KN ,meet different standards;
4. Wire hole provides a possibility to test internal temperature or air pressure while vent hole with air blower can discharge the exhaust air.
5. Control system employs independent control cabinet & separated with the test chamber with a distance 1-2 meter, which can reduce the noise and improve safety.

Technical Parameters

• Model:LEGBE-020/200
• Pressure(KN) 20/200
• Max. Displacement(mm) 200,300,500
• Additional Function(Optional) Voltage, Temperature Sampling, Camera Monitoring system, Fire-extinguishing system, explosion-proof system, smoke evacuation system Crush Speed 0 ~ 40mm/min(Controllable )
• Testing Space (mm) 200X200X200MM, 300X300X300MM or Customize
• External Dimension W680 X D570 X H1740

Optional Function

• Power 0—10V,0--100V
• Temp. Sampling Range 0 ~ 1200℃
• Power, Temperature Accuracy ±1%FS
• Voltage Resolution 1mV
• Temp. Resolution 0.1℃

Main Technical Parameters

• Speed 0 ~ 40mm/min(Controllable )
• Crush Range 0—300MM optional
• Structure Vertical&horizontal (select according to actual size)
• Testing Condition Applied force of 13KN, once the maximum pressure has been obtained it is to be released.
• Crush Method Vertical, Horizontal
• Crush Deformation No (Computerize can be customized)
• Crush Remaining Time 0~99 hours 99 mins 99 seconds
• Driven Method Hydraulic
• Crush Accuracy ±1%

Structure

• Cabinet Independent vertical & horizontal test machine and control system Communication No (Computerize can be customized)
• Crush Clamps Planer crush tray, fixtures in different size upon the different standard
• Data Capture Module Independent remote sampling, multi voltage, temp.,current acquisition channels (optional );
• Standard Channel Quantity 2-channel,4-channel,8-channel,various data acquisition system (optional )
• Camera Monitoring System Test zone installed with high definition camera monitoring system in remote control with explosion-proof (optional).
• Standard Configuration Crush machine 1 set, control cabinet 1 set, crush tray/1 pcs
• Testing Clamp Customize according to actual operating condition.
• Power AC230V/380V 50HZ/60Hz 3 Phase 5 Wire
• Working Condition 0℃~45℃