Hydrocarbon compositional analyzer
Send a request
Hydrocarbon compositional analyzer
LEHCCA determines molecular composition as the final stage of PVT fluid analysis. Gas chromatography (GC) supplies composition data for selecting production equipment, including separators, sulfur-removal facilities and pipelines. These results also support estimates of a project's potential economic return.
Sample separation and chromatographic analysis
The live-oil sample first undergoes flash separation in a gasometer at ambient conditions. The resulting gas and liquid fractions are collected separately and introduced into the analyzer. A pair of specially configured gas chromatographs performs the measurements, with a dedicated instrument for each hydrocarbon phase.
Composition reports
Proprietary software processes the data files produced by both chromatographs. It creates the compositional reports needed for PVT work, covering the recombined sample, the liquid fraction from the separator and the separator report itself.
This description defines the product family. Guaranteed performance, included hardware, exclusions, interfaces and acceptance criteria are stated only in the project-specific technical proposal and approved datasheet.
Required analysis equipment and methods
The compositional workflow uses the following methods, instruments and reporting tools:
- A defined method for analyzing the gas fraction.
- A defined method for analyzing the oil fraction.
- A gas chromatograph configured to analyze both light and heavy gases.
- A liquid-analysis gas chromatograph configured for dead oil.
- A computer and acquisition software serving both chromatographs.
- Tools that compile the results into PVT reports.
- A cryoscope to determine the total molecular weight.
- A facility for measuring GOR, allowing the composition of recombined live oil to be calculated.
Available analytical results
- Hydrocarbon composition is determined through C36.
- Results include percentages expressed by weight %, mole % and volume %.
- Molecular weight and its distribution are reported through C36.
- Report-generation facilities accompany the analysis setup.


