✓ In-house manufacturing — Hastelloy C276 & titanium✓ Custom engineering & prototypes✓ API / ASTM · CSA · CRN · CE✓ Serving US, Canada, EU, Middle East, Central Asia, Africa & LatAm

Heating mantles

  • The LEHM heating mantle surrounds a cylinder to raise its temperature and hold the selected setting. A regulator controls the heat supply. Distributed heating avoids local hot and cold areas, and the mantle can be fitted or taken off easily.

    The construction provides several heating zones and accommodates cylinders with different diameters. It resists chemicals and moisture and is compatible with clean room use. The mantle provides clean heat with economical operation and efficient energy use. Its durable construction keeps maintenance needs and the associated labor cost low.

    This description defines the product family. Guaranteed performance, included hardware, exclusions, interfaces and acceptance criteria are stated only in the project-specific technical proposal and approved datasheet.

    • Heating mantles
  • Type 1: Mantle for a lightweight piston cylinder

    • Heating reaches a working limit of 200°C.
    • Temperature control accuracy is ± 5°C.
    • Cylinder diameters from 60 mm to 80 mm are accommodated.
    • The specified mantle length is 430 mm.
    • The mantle uses Kevlar and silicon aramid materials.
    • Heater output is 400 watts; electrical input is 220 VAC at 50 Hz.

    Type 2: Mantle for a high-pressure piston cylinder

    • The operating temperature limit is 200°C.
    • Temperature control accuracy is ± 5°C.
    • Cylinder diameters from 80 mm to 100 mm are accommodated.
    • The specified mantle length is 500 mm.
    • The mantle uses Kevlar and silicon aramid materials.
    • Heater output is 400 watts; electrical input is 220 VAC at 50 Hz.

    Type 3: Mantle for a gas cylinder

    • Heating reaches a working limit of 100°C.
    • Temperature control accuracy is ± 5°C.
    • Cylinder diameters from 200 mm to 250 mm are accommodated.
    • Mantle length can reach 800 mm.
    • The mantle uses Kevlar and silicon aramid materials.
    • Heater output is 700 watts; electrical input is 220 VAC at 50 Hz.

    Type 4: Mantle for a bottom hole sampler

    • The operating temperature limit is 200°C.
    • Temperature control accuracy is ± 5°C.
    • The mantle uses Kevlar and silicon aramid materials.
    • Heater output is 400 watts; electrical input is 220 VAC at 50 Hz.

    Use and upkeep

    • The mantle is convenient to handle.
    • Heating operates efficiently.
    • Durable construction supports reliable use.
    • Routine maintenance requirements are low.
Coretest