Send a request
Limpet Coil Pressure Reactor Vessels
Description
Limpet Coil Pressure Reactor Vessels LELCPRV - this serie Limpet / Half-Pipe Coil Jacket High Pressure Process Vessel Tank is applicated in the storage application, which is under the high pressure enviroment. The higher the working pressure of pressure vessels is, the thicker the wall of cylinder should be. If the vessel thickness exceeds 16mm, cladding plates could be considered, base material used for strength and clad material used for anti-corrosion function.
Pressure vessels are enclosed containers used to hold liquids, vapors, and gases at a pressure significantly higher or lower than the ambient pressure. They are widely used in various industries such as petrochemical, oil and gas, chemical, and food processing industries. Equipment such as reactors, flash drums, separators, and heat exchangers are examples of pressure vessels.
Specification
Features
- Large scale industrial scale production;
- GB, ASME design and manufacture certificate.
- Max pressure: 200 bar; Max temperature up to 350 ℃;
- We offer carbon steel, stainless steel, or most exotic alloys such as Hastelloy, Monel, or Inconel;
- When the pressure is large, cladding plates could be considered, including base material for strength and clad material for anti-corrosion.
- Internal cooling coil, vent port, liquid / powder charging, dip tube, thermowell, safety rupture disc, pressure safety valve, flush bottom outlet, baffles, light & sight glass, handhole / manhole etc.
- We offer various internal and external finishes for our products.
- Lugs or floor stand leg support.
Parameters
| Norminal volume | 100L-200 m3 |
| Material | CS: SS, other alloy lined |
| Design pressure | -1-200 bar |
| Design temp. | -40-350°C |
| Base Thickness | 6-160mm |
| Clad Thickness | 3-10mm |
| Max Length | 16 m |
| Max Diameter | 6 m |
| Max weight | 200 tons |
| Shape | Vertical or horizontal |
| Head type | Semi-elliptical, Dished type, Hemispherical Flat type |
| Jacket | Dimpled, Half-pipe, Std. |
| Heating type | Oil electric heating; Oil heating; Steam heating |
| Note: If the diameter exceeds 6,000mm, it need to be fabricated on the site. If the unit weight exceeds 200tons or the total length exceeds40m, segmented transport and field welding will be required. | |
| Brand | Coretest |
