CATALOGS
  • MANUFACTURERS

      • Metering Tanks with Pneumatic Motor LEMTPM

      • Compact pressure tanks with mixers are specifically designed for liquids that require gentle or rapid mixing. These tanks, designed for use in factories and research laboratories, can provide periodic or continuous mixing. Due to their low weight and simple design, even female laboratory workers can handle them.

        The cover of these tanks is secured with hinged latches. It is easy to remove to load the raw material, unload the product, or clean the tank. In addition to the mixer, the cover has a hole for attaching a 6mm immersion tube. This tube can be used to dose the liquid into a chemical reactor or receiver by pressurization (using compressed air/gas). A regulating valve with a pressure gauge is provided on the gas supply line to control the flow rate.

        In the basic version, all mixers are supplied with a two-bladed mixing element. In addition, a three-bladed, four-bladed, or anchor (frame) mixing element can be ordered.

      • Features:

        • Material: stainless steel 304
        • Drive type: pneumatic
        • Cover seal: viton
        • Cover attachment: clamps
        • Cover equipment: mixer, gas inlet, 6 mm tube attachment, pressure relief valve
        • Pressure control valve with pressure gauge for gas flow regulation

        Mixing speed control is achieved by regulating the supply of compressed air to the drive. The air flow control kit is not included in the delivery set.

        Model LEMTPM-1000 LEMTPM-2000 LEMTPM-5000 LEMTPM-10000 LEMTPM-25000
        Volume: 1 l 2 l 5 l 10 l 25 l
        Diameter (ID) / height: 100 mm 100 mm 148 mm 200 mm 270 mm
        Total height: 235 mm 459 mm 505 mm 604 mm 708 mm
        Maximum pressure: 6,9 bar 6,9 bar 6,9 bar 6,9 bar 6,9 bar
        Mixer power: 0,25 kW 0,25 kW 0,25 kW 0,38 kW 0,38 kW
        Speed (min) 30 rpm 30 rpm 30 rpm 48 rpm 48 rpm
        Speed (max): 450 rpm 450 rpm 450 rpm 320 rpm 320 rpm
        Speed under load: 235 rpm 235 rpm 235 rpm 160 rpm 160 rpm
        Load (torque): 10 Нм 10 Нм 10 Нм 43 Нм 23 Нм
        Air consumption: 5,3 l/s 5,3 l/s 5,3 l/s 8,3 l/s 8,3 l/s
        Weight: 2,8 kg 3,2 kg 7,8 kg 16 kg 22 kg
        • Metering Tanks with Pneumatic Motor LEMTPM
        • Metering Tanks with Pneumatic Motor LEMTPM
        • Metering Tanks with Pneumatic Motor LEMTPM
        • Metering Tanks with Pneumatic Motor LEMTPM
        • Metering Tanks with Pneumatic Motor LEMTPM
      • Metering Tanks with Pneumatic Motor LEMTPM
      • Metering Tanks with Pneumatic Motor LEMTPM
      • Metering Tanks with Pneumatic Motor LEMTPM
      • Metering Tanks with Pneumatic Motor LEMTPM
      • Metering Tanks with Pneumatic Motor LEMTPM
        ModelLEMTPM
        BrandLabEquipx