Metering Tanks with Electric Motor LEMTEM

Compact pressure tanks with mixers are specifically designed for liquids that require gentle or rapid mixing. These tanks, designed for use in factories and research laboratories, can provide periodic or continuous mixing. Due to their low weight and simple design, even female laboratory workers can handle them.

The cover of these tanks is secured with hinged latches. It is easy to remove to load the raw material, unload the product, or clean the tank. In addition to the mixer, the cover has a hole for attaching a 6mm immersion tube. This tube can be used to dose the liquid into a chemical reactor or receiver by pressurization (using compressed air/gas). A regulating valve with a pressure gauge is provided on the gas supply line to control the flow rate.

In the basic version, all mixers are supplied with a two-bladed mixing element. In addition, a three-bladed, four-bladed, or anchor (frame) mixing element can be ordered.

Mixing speed is controlled by an external remote controller. It also allows for reversing the direction of rotation.

Model	LEMTEM-1000	LEMTEM-2000	LEMTEM-3000	LEMTEM-10000	LEMTEM-25000
Volume:	1 l	2 l	5 l	10 l	25 l
Inner diameter (ID) / height:	100 mm	100 mm	148 mm	200 mm	270 mm
Total height:	296 mm	431 mm	408 mm	590 mm	528 mm
Maximum pressure:	6,9 bar	6,9 bar	6,9 bar	6,9 bar	6,9 bar
Mixer power:	0,3 kW	0,3 kW	0,3 kW	0,25 kW	0,25 kW
Minimum speed:	30 rpm	30 rpm	30 rpm	30 rpm	30 rpm
Maximum speed:	800 rpm	800 rpm	800 rpm	800 rpm	800 rpm
Torque:	0,1 Нм	0,1 Нм	0,1 Нм	1,27 Нм	1,27 Нм
Power supply:	220 В / 50 Hz	220 В / 50 Hz	220 В / 50 Hz	220 В / 50 Hz	220 В / 50 Hz
Weight:	2,8 kg	3,2 kg	7,8 kg	16 kg	22 kg

Model	LEMTEM
Brand	LabEquipx

Send a request