Specification

Plugs per run	3 × 1.5 in, up to 2 in long (maximum 1.555 × 2.010 in); 1 in rotor on request
Bucket sets	drainage (standard) and imbibition (inverted), interchangeable on one rotor yoke
Plug face radii	drainage 43.0 / 93.8 mm; imbibition 115.5 / 166.3 mm
Speed	up to 13,000 rpm, ±20 rpm
RCF at outer plug face	17,720 ×g drainage; 31,420 ×g imbibition
Readout	stroboscope and camera image each measuring tube during rotation; automatic level detection
Measuring tube	6 mL, 0.1 mL graduation as standard; other volumes per project
Temperature	20 to 40 °C during tests; vacuum chamber
Rotor life	13,000 rpm for 1,000 runs or 2,500 h, then 10,000 rpm up to 5 years
Power	220 V ±10 %, 50 Hz, single phase, 30 A
Size / weight	700 × 900 × 1300 mm / 450 kg

Guaranteed values are stated in the project-specific technical proposal.