Specification

Rotor	fixed rotor with radial sealed holders; 1 in or 1.5 in plugs, up to 2 in long; holder count per rotor
Maximum speed	about 11,000 rpm with the standard rotor; lower for large-plug rotors (for example 9,000 rpm for 3 × 1.5 in)
Speed setting / accuracy	50 rpm steps / ±50 rpm, speed or RCF entry
Chamber temperature	setting −20 to +40 °C; during rotation held down to about +10 °C at medium speed and +15 °C at full speed
Programs	up to 10 speed steps per program, 100 programs stored
Timer	1 min to 99 h 59 min, countdown from set speed
Measurement	plug mass before the run and after each step, laboratory balance
Protection	lid lock, imbalance, overspeed, rotor identification, over-temperature, supply voltage
Power	220 V ±10 %, 50 Hz, single phase, 20 A line
Size / weight	approx. 800 × 740 × 930 mm / approx. 300 kg

Guaranteed values are stated in the project-specific technical proposal.